AVSPARE.COM
parts catalog

KIT-ENGINE OVERHAUL 3599751 - Caterpillar



3599751 KIT-ENGINE OVERHAUL Caterpillar parts 3516 KIT
Rating:
81
Alternative (cross code) number:
CA3599751
359-9751
3599751
Caterpillar 3599751 KIT-ENGINE OVERHAUL

Buy KIT-ENGINE OVERHAUL 3599751 Caterpillar genuine, new aftermarket tractor parts with delivery
GEN SET ENGINE,

Compatible equipment models: 3599751:

GEN SET ENGINE  3516   Caterpillar
  For full view, you need register

Information:


Table 1
Charge Pressure for the Accumulator at Different Temperatures
Temperature Pressure
−40° C (−40° F) 4370 kPa (634 psi)
−34.4° C (−30° F) 4474 kPa (649 psi)
−28.9° C (−20° F) 4578 kPa (664 psi)
−23.3° C (−10° F) 4682 kPa (679 psi)
−17.8° C (0° F) 4787 kPa (694 psi)
−12.2° C (10° F) 4891 kPa (709 psi)
−6.7° C (20° F) 4995 kPa (724 psi)
−1.1° C (30° F) 5099 kPa (740 psi)
4.4° C (40° F) 5203 kPa (755 psi)
10° C (50° F) 5308 kPa (770 psi)
15.6° C (60° F) 5412 kPa (785 psi)
21.1° C (70° F) 5516 276 kPa (800 40 psi)
26.7° C (80° F) 5620 kPa (815 psi)
32.2° C (90° F) 5724 kPa (830 psi)
37.8° C (100° F) 5829 kPa (845 psi)
43.3° C (110° F) 5933 kPa (860 psi)
48.9° C (120° F) 6037 kPa (876 psi)
54.4° C (130° F) 6141 kPa (891 psi)
60° C (140° F) 6245 kPa (906 psi)
Table 2
Accumulator Precharge Pressure
Brake System Precharge Pressure Actual
Front Brake Accumulator 5516 276 kPa (800 40 psi)
Rear Brake Accumulator 5516 276 kPa (800 40 psi) References
Special Instruction, REHS5464, "Accumulator Discharging and Charging Procedures"Introduction
This information includes the following test:
Service brake accumulator test and chargeTest Preparation
Move the machine to a smooth, horizontal location that is away from operating machines and away from personnel.
Permit only one operator on the machine. Keep all other personnel away from the machine or in the operator sight.
Rotate the steering wheel to a NEUTRAL position.
Move the transmission control to park to engage the parking brake.
Lower or retract the implements.
Stop the engine.
Turn the key to the ON position, but do not start the engine.
Make multiple applications to the service brakes and engage and disengage the parking brake to exhaust stored hydraulic pressure in the accumulators.
Place blocks in front and behind the wheels.Test Procedure
Illustration 1 g06286286
Front brake accumulator
(1) Front Service Brake Accumulator
Illustration 2 g06286293
Inner left side frame view of the rear accumulator
(2) Rear Service Brake Accumulator
Test the front and rear service brake accumulators for their nitrogen pre-charge pressures. Refer to Special Instruction, REHS5464, "Accumulator Discharging and Charging Procedures" for the instructions and tooling required.Note: Refer to Table 1 for the appropriate accumulator charge.Charging Procedure
Refer to Special Instruction, REHS5464, "Accumulator Discharging and Charging Procedures" for the instructions and tooling required for the charge procedure.
Illustration 3 g06296190
Front service brake accumulator
(1) Front Service Brake Accumulator
(3) Valve Group
Accumulator (1) is on the left side of the machine beneath the fender. Charging valve (3) is on the top of the accumulator.Note: Do not attempt to charge the accumulator until all pressure has been removed from the pilot accumulator.
Illustration 4 g06336502
Rear service brake accumulator
(2) Rear Service Brake Accumulator
(5) Valve Group
Accumulators (2) are on the inner left and right side of the trailer arrangement frame. Charging valve (5) is on the top of the accumulator.Note: Do not attempt to charge the accumulator until all pressure has been removed from the pilot accumulator.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts kit Caterpillar catalog:

2011519 KIT-GASKET
3508, 3508B, 3512, 3512B, 3516, G3516
6N1875 KIT-OUTPUT TERMINAL
3116, 3126, 3126B, 3176B, 3176C, 3196, 3304, 3306, 3306B, 3306C, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, 3456, 3508, 3508B, 3508C, 3512, 3512B, 3512C, 3516, 35...
7T2804 KIT-ALTERNATOR TERMINAL
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 235, 245, 3114, 3116, ...
8T9884 KIT-INSULATOR
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 14G, 14H, 14H NA, 14M, 160G, 160H, 16...
1P7832 KIT-BEARING & WICK
130G, 140G, 16G, 215, 235, 245, 3208, 3304, 3306, 3306B, 3406, 3406B, 3408, 3412, 3508, 3512, 3516, 572G, 589, 621, 627E, 631E, 637E, 651E, 657E, 773B, 815B, 826C, 834B, 920, 950B, 951B, 963, 966C, 97...
8S4684 KIT-BEARING & WICK
120G, 130G, 140G, 14G, 16G, 215, 235, 245, 3208, 3304, 3306, 3306B, 3406, 3406B, 3408, 3412, 3508, 3512, 3516, 518, 561C, 572G, 589, 613, 613B, 613C, 627E, 631E, 637E, 651E, 657E, 815B, 826C, 834B, 92...
1N3593 KIT-BEARING
3412, 3412C, 3412E, 3508, 3512, 3512B, 3516, 3516B, 651E, 657E, 784B, 785, 785B, 793, 793B, G3412, G3512, G3516, PM3412, PM3512, SCT673, SPS342, SPT342
6V3774 KIT-GASKET
3508, 3508B, 3512, 3512B, 3516, 3516B, 5130, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B, D11N, G3508, G3512, G3516
8T4866 KIT-GASKET
3508, 3512, 3516, G3512, G3516
1468947 KIT-GASKET
3508, 3512, 3516
1969531 KIT-BASIC ENGINE REPAIR
3512, 3516, 3516B, 3516C, 5230, 5230B, 785C, 789, 789B, 789C, 789D, 793C, 793D, 994, 994D, G3516, G3516B, G3516C, G3516E, PM3516, PMG3516, PP3516
9R6489 KIT-RAIL CONVERSION
416, 426, 428, 436, 438
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.