3966863 KIT-CONNECTION Caterpillar parts
Rating:
Alternative (cross code) number:
CA3966863
396-6863
3966863
CA3966863
396-6863
3966863
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
$176.21
30 Apr 2021
US: Transport Diese
Genuine Cummins 3966863 MANIFOLD,FUEL
Cummins
Cummins
For full view, you need register
Information:
Removal Procedure
Start By:
Remove the drive and steering axle from the machine. Refer to Disassembly and Assembly, "Drive and Steering Axle (Front) - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the oil from the axle. Refer to Operation and Maintenance Manual, "Differential Oil - Change".
Illustration 1 g01024181
Note: Put location marks on the axle housing, brake cylinder assemblies, and the center housing for assembly purposes.
Position wood blocks under the drive and steering axle in order to support the sections during removal. Attach a suitable lifting device onto the axle housing. The weight of the axle housing is approximately 170 kg (375 lb). Remove bolts (1) .
Illustration 2 g01024184
Remove axle housing (2) from brake cylinder assembly (3) .
Repeat Steps 2 through 3 for the other side.
Start By:
Remove the drive and steering axle from the machine. Refer to Disassembly and Assembly, "Drive and Steering Axle (Front) - Remove".
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Drain the oil from the axle. Refer to Operation and Maintenance Manual, "Differential Oil - Change".
Illustration 1 g01024181
Note: Put location marks on the axle housing, brake cylinder assemblies, and the center housing for assembly purposes.
Position wood blocks under the drive and steering axle in order to support the sections during removal. Attach a suitable lifting device onto the axle housing. The weight of the axle housing is approximately 170 kg (375 lb). Remove bolts (1) .
Illustration 2 g01024184
Remove axle housing (2) from brake cylinder assembly (3) .
Repeat Steps 2 through 3 for the other side.