AVSPARE.COM
parts catalog

KIT-SEAL 4Z8933 - Caterpillar



4Z8933 KIT-SEAL Caterpillar parts KIT
Rating:
11
Alternative (cross code) number:
CA4Z8933
4Z-8933
4Z8933
Caterpillar 4Z8933 KIT-SEAL
Weight: 2 pounds 1 kg.

Buy KIT-SEAL 4Z8933 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Table 1
Model     Effective with     Adaptable to    
R2900G     -     S/N:JLK1-UP    
R2900G     S/N:NLK1-UP     -    
R3000H     -     S/N:RCM1-UP    
R3000H     S/N:RCY1-UP     -    Refer to the following procedure in order to improve service life.Parts Required
Table 2
Qty     Part Number     Part Description    
8     0S-2318     Bolt    
1     171-3940     Yoke    
1     196-6845     Yoke As    
1     4E-3604     Universal Joint Gp    
1     2H-3933     O-Ring Seal    Procedure
Personal injury or death can result from machine articulation or movement. Machine frames can move and a person can be crushed. Connect the steering frame lock between the front and rear frames before working on the machine.Before operating the machine, place the steering frame lock in the stored position.Failure to place the steering frame lock into the stored position before operating can result in loss of steering.
ReferenceDisassembly and Assembly, UENR1483, "R3000H Load Haul Dump Machine Systems"ReferenceDisassembly and Assembly, RENR8556, "R2900G Load Haul Dump"ReferenceDisassembly and Assembly, UENR1475, "R3000H Load Haul Dump Power Train"ReferenceDisassembly and Assembly, RENR8558, "R2900G Load Haul Dump Power Train"ReferenceOperation and Maintenance Manual, SEBU8320, "R3000H Load Haul Dump"ReferenceOperation and Maintenance Manual, SEBU7333, "R2900G Load Haul Dump"
Move the machine to a hard level surface away from operating machines and away from personnel.
Engage the parking brake. Place wheel blocks in front of the wheels and behind the wheels.
Stop the engine.
Install the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Remove and Install".
Turn the key start switch and the battery disconnect switch to the OFF position. If there is no battery disconnect switch, remove the negative battery cable at the battery.
Release system pressure. Refer to Disassembly and Assembly, "System Pressure - Release".
Drain the


Parts kit Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.