AVSPARE.COM
parts catalog

KIT-RECHARGE 9W0376 - Caterpillar



9W0376 KIT-RECHARGE Caterpillar parts 992C, D8L, D9L KIT
Rating:
8
Alternative (cross code) number:
CA9W0376
9W-0376
9W0376
Caterpillar 9W0376 KIT-RECHARGE
Weight: 0.010 pounds 0 kg.

Buy KIT-RECHARGE 9W0376 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR, WHEEL LOADER,

Compatible equipment models: 9W0376:

TRACK-TYPE TRACTOR  D8L   D9L  
WHEEL LOADER  992C   Caterpillar
Number on catalog scheme: None
 
  For full view, you need register

Information:


Illustration 24 g01089008
Illustration 25 g01089009
Illustration 26 g01089011
Install Tooling (C) to anchor (25). Turn Tooling (C) clockwise to compress return spring (39).
Remove pin (41) from guide pin (40).
Turn Tooling (C) counterclockwise to release the tension on return spring (39).
Remove Tooling (C), guide pin (40) and return spring (39) from anchor (25).
Repeat Step 37 through Step 40 for the five remaining return springs, guide pins and pins.
Illustration 27 g01089012
Remove piston (42) from housing (32).
Illustration 28 g01089013
Remove seals (43) and (44) from piston (42).
Illustration 29 g01089014
Remove 30 bolts (46) from anchor (25).
Personal injury can result from being struck by parts propelled by a released spring force.Make sure to wear all necessary protective equipment.Follow the recommended procedure and use all recommended tooling to release the spring force.
Loosen four special nuts (45) evenly until all the spring force on housing (32) is released.
Illustration 30 g01089016
Attach Tooling (A) and a suitable lifting device to housing (32). The weight of housing (32) is approximately 120 kg (265 lb). Remove housing (32) from anchor (25).
Remove Tooling (A) and four taperlock studs (47) from housing (32).
Illustration 31 g01089017
Turn housing (32) so that the splined end faces downward.
Remove three seals (48) from housing (32).
Remove seals (49) and (50) from housing (32).
Remove four taperlock studs (51) from housing (32).
Illustration 32 g01089018
Remove O-ring seal (52) from anchor (25).
Remove piston (53) from anchor (25).
Illustration 33 g01089019
Remove 25 spring assemblies (54) from anchor (25).
Illustration 34 g01089020
Remove eight bolts (55) from sleeve (56).
Remove sleeve (56) from anchor (25).
Illustration 35 g01089021
Remove O-ring seal (57) from sleeve (56).
Illustration 36 g01089022
Remove four plugs (58) from anchor (25). Remove the O-ring seals from plugs (58).

Caterpillar parts catalog:

Caterpillar parts catalog
D8L TRACTOR 53Y00001-UP (MACHINE) POWERED BY 3408 ENGINE
D8L TRACTOR SPECIAL APPLICATION 4FB00001-UP (MACHINE) POWERED BY 3408 ENGINE
785 TRUCK 8GB00001-UP (MACHINE) POWERED BY 3512 ENGINE
D11N TRACTOR / POWER SHIFT / 74Z00001-UP (MACHINE) POWERED BY 3508 ENGINE
D9N TRACTOR 1JD00001-UP (MACHINE) POWERED BY 3408 ENGINE
789 TRUCK 9ZC00001-00610 (MACHINE) POWERED BY 3516 ENGINE
D10N TRACK-TYPE TRACTOR 2YD00001-UP (MACHINE) POWERED BY 3412 ENGINE
789 TRUCK 9ZC00611-UP (MACHINE) POWERED BY 3516 ENGINE
992C Wheel Loader 49Z00001-UP (MACHINE) POWERED BY 3412 Engine


Parts kit Caterpillar catalog:

2436718 KIT-CRANKSHAFT BEARING
16G, 16H NA, 24H, 24M, 3406, 3406B, 3406C, 3406E, 3412, 3412C, 3412D, 3412E, 3456, 365C, 365C L, 365C L MH, 374D L, 374F L, 375 L, 385B, 385C, 385C FS, 385C L, 385C L MH, 390D, 390D L, 390F L, 5080, 5...
1609874 KIT-GASKET
16G, 16H NA, 24H, 3406, 3406B, 3406C, 3406E, 3408, 3408B, 3408C, 3408E, 3412, 3412C, 3412E, 365C, 365C L, 365C L MH, 375, 375 L, 5080, 578, 583T, 589, 621F, 621G, 623E, 623F, 623G, 627B, 627F, 627G, 6...
3891339 KIT-GASKET
3412, 3412C, 992C
7N7807 KIT-OUTPUT TERMINAL
120H, 120H NA, 12H, 12H NA, 135H, 135H NA, 140H, 140H NA, 140K, 14H NA, 160H, 160H NA, 160K, 215, 229, 245, 3116, 3126, 3126B, 3176B, 3176C, 3196, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3...
7N7808 KIT-RELAY TERMINAL
120H, 120H NA, 12H, 12H NA, 135H, 135H NA, 140H, 140H NA, 140K, 14H NA, 160H, 160H NA, 160K, 215, 229, 245, 3116, 3126, 3126B, 3176B, 3176C, 3196, 3208, 3304, 3304B, 3306, 3306B, 3406, 3406B, 3406C, 3...
9G7559 KIT-RELAY TERMINAL
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H NA, 235, 245, 3114, 3116, ...
7N3194 KIT-BEARING
16G, 245, 3306, 3406, 3406B, 3408, 3408C, 3412, 3412C, 3412E, 3508, 3512, 3516, 5130, 5230, 589, 627B, 631E, 633E II, 637E, 657E, 776C, 777, 777B, 789B, 826C, 980C, 992C, 992D, C32, D10N, D11N, D11R, ...
9T1437 KIT-PLUG
215B, 345B II MH, 587R, 587T, 613C, 613C II, 651E, 657E, 657G, 7271, 769C, 773B, 777, 777B, 793C, 824C, 834B, 836, 936, 936F, 950B, 950F, 950F II, 960F, 966F, 966F II, 970F, 973, 980C, 980F, 988B, 988...
1006534 KIT-REGULATOR
120H NA, 3406B, 3408, 3508, 3512, 3516, 375, 5080, 621E, 621F, 623E, 627E, 631E, 637E, 651E, 657E, 834B, 950F, 966F, 988B, 992C
0647311 KIT-VANE
518, 518C, 528, 528B, 530B, 561H, 561M, 611, 613C, 613C II, 613G, 615C, 623B, 814F, 814F II, 815B, 815F, 815F II, 816F, 816F II, 824C, 825C, 844, 844H, 844K, 916, 926, 936, 936F, 943, 950B, 950B/950E,...
1U0379 KIT-FLEX PLATE
153, 173B, 518, 518C, 528, 528B, 530B, 561H, 561M, 572G, 613B, 613C, 613C II, 615, 615C, 623B, 631C, 633D, 814B, 815B, 824C, 825C, 844, 844H, 916, 920, 926, 936, 936F, 950, 950B, 950B/950E, 953, 973, ...
6V4541 KIT-GASKET
651E, 657E, D9L
1198119 KIT-CONVERSION
120G, 12G, 130G, 140G, 160G, 834B, 988B, 988F, 992C, 994
6V7247 KIT-GASKET
834B, 836, 988B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.