AVSPARE.COM
parts catalog

Lafayette 3608 Engine VHD6800 - Caterpillar



VHD6800 Lafayette 3608 Engine Caterpillar parts 3608 Lafayette
Rating:
35
Alternative (cross code) number:
CAVHD6800
VHD-6800
VHD6800
Caterpillar VHD6800 Lafayette 3608 Engine

Buy Lafayette 3608 Engine VHD6800 Caterpillar genuine, new aftermarket tractor parts with delivery
MARINE ENGINE,

Compatible equipment models: VHD6800:

MARINE ENGINE  3608   Caterpillar
  For full view, you need register

Information:

Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B 9S-3263 Thread Lock Compound 1
Illustration 1 g01127626
Improper assembly of parts that are spring loaded can cause bodily injury.To prevent possible injury, follow the established assembly procedure and wear protective equipment.
Install spring (3), spool (2), and plug (1). Tighten plug (1) to a torque of 75 N m (55 lb ft).
Install O-ring seal (4), screw (5), and plug (6). Tighten screw (5) to a torque of 45 N m (33 lb ft). Tighten plug (6) to a torque of 18 N m (13 lb ft).
Install seat (7), spring (8), seat (9), plug assembly (10), and cap (11). Tighten plug assembly (10) to a torque of 45 N m (33 lb ft).
Install plugs (12). Tighten plugs (12) to a torque of 3 N m (26 lb in).
Apply Tooling (A) to pipe (20). Install seal (24), washer (22), and pipe (20). Tighten pipe (20) to a torque of 5 N m (44 lb in). Install spring (19), spring assembly (16), retaining ring (15), boot (14), and lever (13).
Install plug (43). Tighten plug (43) to a torque of 45 N m (33 lb ft). Install plug (27) to a torque of 45 N m (33 lb ft).
Install sleeve (17), backup ring (18), seal (21), sleeve (23), spring (25), case (28), spring (26), and plug (29). Tighten plug (29) to a torque of 10 N m (88 lb in). Install plug (30). Tighten plug (30) to a torque of 45 N m (33 lb ft).
Install sleeve (31), O-ring seal (32), and plug (33). Tighten plug (33) to a torque of 75 N m (55 lb ft).
Install sleeve (34), spring (35), pin (42), sleeve (41), spring (40), pin (39), O-ring seal (38), and collar (36). Tighten collar (36) to a torque of 45 N m (33 lb ft). Install plug (37) into block (44). Tighten plug (37) to a torque of 28 N m (20 lb ft). End By:
Install the brake valve.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.