parts catalog

Lafayette 3606 Engine VTY4700 - Caterpillar

VTY4700 Lafayette 3606 Engine Caterpillar parts G3606 Lafayette
Alternative (cross code) number:
Caterpillar VTY4700 Lafayette 3606 Engine

Buy Lafayette 3606 Engine VTY4700 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: VTY4700:

GAS ENGINE  G3606   Caterpillar
  For full view, you need register


Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01058672
Illustration 2 g01057337
Remove plug (1) and drain the oil into a suitable container for storage or disposal.
Illustration 3 g01059889
Remove plug (2) and drain the oil into a suitable container for storage or disposal. Remove bolts (3) .
Illustration 4 g01059890
Install Tooling (A) and Tooling (B) .
Illustration 5 g01059892
Slide final drive (4) slightly outward. Attach Tooling (C) and a suitable lifting device onto final drive (4). The weight of final drive (4) is approximately 52 kg (115 lb). Remove Tooling (A) and Tooling (B). Remove final drive (4) .
Illustration 6 g01058589
Remove O-ring seal (5) from final drive (4) .
Illustration 7 g01058591
Remove bolt (6). Remove sun gear (7) and sleeve (8) .
Illustration 8 g01059897
Use Tooling (D) and remove thrust disc (9) .
Illustration 9 g01059895
Attach Tooling (E) onto wheel hub (10). Attach a chain onto Tooling (E) and around the axle in order to retain wheel hub (10) .
Illustration 10 g01059896
Remove the stake in nut (11). Remove set screw (12). Use Tooling (F) and remove nut (11) .
Illustration 11 g01059899
Use two people and remove ring gear (13). The weight of ring gear (13) is approximately 27 kg (60 lb).
Illustration 12 g01059921
Remove bolts (14) and plates (15). Remove hub (16) from ring gear (13) .
Illustration 13 g01059922
If necessary, remove thrust disc (17) from carrier (18) .Installation Procedure
Install final drive (4) in reverse order of removal.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Parts lafayette Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.