AVSPARE.COM
parts catalog

LEVER AS-TILT 2333601 - Caterpillar



2333601 LEVER AS-TILT Caterpillar parts IT62G II, IT62H LEVER
Rating:
13
Alternative (cross code) number:
CA2333601
233-3601
2333601
Caterpillar 2333601 LEVER AS-TILT
Weight: 100 pounds 45 kg.

Buy LEVER AS-TILT 2333601 Caterpillar genuine, new aftermarket tractor parts with delivery
INTEGRATED TOOLCARRIER,

Compatible equipment models: 2333601:

INTEGRATED TOOLCARRIER  IT62G II   IT62H   Caterpillar
Number on catalog scheme: 33
 
  For full view, you need register

Information:

Probable Causes
Valve lash setting is not at factory specifications.
Worn rocker arms
Worn valve springs or broken valve springs
Bent pushrods
Worn camshaft
Valve seat wearRecommended Actions
Table 1
Troubleshooting Test Steps     Values     Results    
1. Valve Lash Setting
A. Check the engine valve lash. If necessary, adjust the engine valve lash. Refer to Systems Operation/Testing and Adjusting for information on adjusting the engine valve lash.
   
Valve Lash    
Result: The valve lash is set to specifications.
Return the unit to service.
Result: The valve lash cannot be set to specifications.
Proceed to Test Step 2.    
2. Rocker Arms
A. Inspect rocker arms for pitting or spalling on the roller.
B. Check the rocker arm for a missing button.
   
Rocker Arms    
Result: The rocker arms are damaged.
Repair: Replace parts, if necessary. If the symptom remains, proceed to Test Step 3.
If the problem has been corrected, return the unit to service.
Result: The rocker arms are not damaged.
Proceed to Test Step 3.
   
3. Valve Springs
A. Check for cracked valve springs or broken valve springs.
   
Valve Springs    
Result: The valve springs are not broken or cracked.
Proceed to Test Step 4.
Result: The valve springs are broken or cracked.
Repair: Replace parts, if necessary. If the symptom remains, Proceed to Test Step 4.
If the problem has been corrected, return the unit to service.
   
4. Pushrods
A. Check the pushrods for wear and straightness.
B. Roll the pushrods on a flat surface in order to determine the straightness of the rod.
   
Pushrods    
Result: The pushrods are not worn or bent.
Proceed to Test Step 5.
Result: The pushrods are worn or bent.
Repair: Replace parts, if necessary. If the symptom remains, Proceed to Test Step 5.
If the problem has been corrected, return the unit to service.
   
5. Camshaft
A. Remove the camshaft in order to inspect the camshaft.
B. Inspect the camshaft for large grooves.
C. Measure the camshaft in order to determine if the camshaft is in specifications. Refer to Reuse and Salvage Guidelines for the correct measurements.
   
Camshaft    
Result: The camshaft measured within specifications.
Proceed to Test Step 6.
Result: The camshaft did not measure within specifications.
Repair: Make the necessary repairs, If the symptom remains, proceed to Test Step 6. If you replace the camshaft, replace the valve lifters.
If the problem has been corrected, return the unit to service.
   
6. Cylinder Head
A. Remove the cylinder head. Refer to the Reuse and Salvage Guidelines for the reusability specifications.
B. Inspect the piston and valve for damage.
C. Inspect the valve seat for wear.
   
Engine Components    
Result There are worn or damaged engine components.
Repair: Replace parts, if necessary. Check the Reuse and Salvage Guidelines for the reusability of existing engine components.
   Contact your Cat dealer Technical Communicator (TC). For further assistance, your TC can confer with the Dealer Solutions Network (DSN).

Caterpillar parts catalog:

Caterpillar parts catalog
IT62G II Integrated Toolcarrier AYA00001-UP (MACHINE) POWERED BY 3126B Engine
IT62H Integrated Toolcarrier M5G00001-UP (MACHINE) POWERED BY C7 Engine


Parts lever Caterpillar catalog:

9M7394 LEVER
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 12E, 12G, 12H, 12H ES, 12H NA, 12K, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 143H, 14G, 14H, 14H NA, 16, 160G, 160H, 160H ES, 160H N...
1794682 LEVER
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 312C, 315C, 318C, 319C, 320C FM, 320D, 320D FM, 320D FM RR, 322C, 322C FM, 324D FM, 324D FM LL, 325C, 325C FM, 325D FM, 330C FM, 330C L, 3...
1872082 LEVER-CONTROL
554, 564, 574B, 814F, 814F II, 815F, 815F II, 816F, 816F II, 824G II, 824H, 824K, 825G II, 825H, 825K, 826G II, 826H, 826K, 834G, 834H, 834K, 836G, 836H, 836K, 914G, 924G, 924GZ, 924H, 924HZ, 928G, 92...
8N2622 LEVER
621G, 910E, 910G, 914G, 916, 918F, 924F, 924G, 924GZ, 926, 926A, 928F, 928G, 936, 936F, 938F, 938G, 938G II, 938H, 950 GC, 950B, 950B/950E, 950F, 950F II, 950G, 950G II, 950H, 960F, 962G, 962G II, 962...
7I4078 LEVER AS
515, 525, 814F, 814F II, 815F, 815F II, 816F, 816F II, 824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 844, 844H, 854G, 854K, 950 GC, 950F, 950F II, 950G, 950G II, 950H, 960F, 962G, 962...
1938113 LEVER AS
950G II, 950H, 962G II, 962H, 966G II, 966H, 972G II, 980G II, 980H, IT62G II
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.