AVSPARE.COM
parts catalog

LINE AS-FUEL 3156653 - Caterpillar



3156653 LINE AS-FUEL Caterpillar parts C13, TH35-C13T LINE
Rating:
47
Alternative (cross code) number:
CA3156653
315-6653
3156653
Caterpillar 3156653 LINE AS-FUEL
Weight: 0.010 pounds 0 kg.

Buy LINE AS-FUEL 3156653 Caterpillar genuine, new aftermarket tractor parts with delivery
PETROLEUM PACKAGE, TRUCK ENGINE,

Compatible equipment models: 3156653:

PETROLEUM PACKAGE  TH35-C13T  
TRUCK ENGINE  C13   Caterpillar
Number on catalog scheme: 5
 
  For full view, you need register

Information:


Illustration 1 g00751886
To keep the harvester head from pivoting during roading, install a chain for safety around the harvester head, as shown.Reference: For more information about the chain, refer to the Operation and Maintenance Manual of the work tool.
Illustration 2 g00676006
Fully retract the extendable stick. Block up the boom cylinders with 191-9375 Cylinder Stop. Secure the harvester head to the boom with a chain for safety, as shown. Reference: For more information about the chain, refer to the Operation and Maintenance Manual of the work tool.Note: Keep the harvester head in the vertical position but tilt the boom so that the harvester head is horizontal to the ground, as shown. Make sure that there is at least 250 mm (9.8 inch) of clearance between the harvester head and the ground. Also, make sure that there is at least 1 m (3 ft) of clearance between the harvester head and the machine.
Illustration 3 g00861003
Install two swing pins in the holes under the front of the cab in order to prevent the cab from rotating during roading. Remember to remove the swing pins before you try to rotate the cab.
Perform a walk-around inspection and measure the fluid levels in the various compartments.Reference: For more information, refer to Operation and Maintenance Manual, "Daily Inspection".
Turn off all working lights. Install the roading lights.Reference: For more information, refer to the section on Working Lights of Operation and Maintenance Manual, "Operator Controls".
Make sure that the steering wheel (if equipped) is installed properly.Reference: For more information, refer to Operation and Maintenance Manual, "Steering Control".
Close the cab door. Secure the hoods and all access doors in the closed position.
Set the traction control system to the automatic mode when you are roading the machine. This will allow the IQAN system to control the traction automatically.
Place the machine in roading mode. Use the proportional steering joystick or the steering wheel (if equipped) to steer the machine.
Travel at a moderate speed. Observe all speed limits when you road the machine.

Caterpillar parts catalog:

Caterpillar parts catalog
C13 On-Highway Engine LEE00001-UP
C13 Euro IV Truck Engine S3C00001-UP
TH35-C13I Petroleum Package LEE00001-UP POWERED BY C13 Engine


Parts line Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.