1247300 LINER Caterpillar parts 950F II LINER
Rating:
Alternative (cross code) number:
CA1247300
124-7300
1247300
CA1247300
124-7300
1247300
Weight: 1 pounds 0 kg.
Buy LINER 1247300 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,
Compatible equipment models: 1247300:
WHEEL LOADER 950F II
Caterpillar
Information:
Problem List
The starting motor does not turn or the starting motor turns too slowly.
The armature turns, but the pinion does not engage the flywheel ring gear.
The armature turns. The pinion engages the ring gear, but the engine does not crank.
The starting motor continues to run after the key start switch has been released.
The pinion does not disengage after the engine starts to run. Problems
The starting motor does not turn or the starting motor turns too slowly.
Probable Causes:
The battery is discharged: The battery needs to be charged.
The battery is damaged: The battery needs to be replaced.
The battery cable terminals are loose. The terminals are corroded or the terminals have a poor ground connection: Tighten the cable terminals. Clean the terminals and the battery posts. Apply anti-acid grease to the battery posts.
The solenoid contacts are burnt or worn out: Replace the solenoid (switch).
The solenoid windings are disconnected or the solenoid windings are short circuited: Replace the solenoid (switch).
The
The starting motor does not turn or the starting motor turns too slowly.
The armature turns, but the pinion does not engage the flywheel ring gear.
The armature turns. The pinion engages the ring gear, but the engine does not crank.
The starting motor continues to run after the key start switch has been released.
The pinion does not disengage after the engine starts to run. Problems
The starting motor does not turn or the starting motor turns too slowly.
Probable Causes:
The battery is discharged: The battery needs to be charged.
The battery is damaged: The battery needs to be replaced.
The battery cable terminals are loose. The terminals are corroded or the terminals have a poor ground connection: Tighten the cable terminals. Clean the terminals and the battery posts. Apply anti-acid grease to the battery posts.
The solenoid contacts are burnt or worn out: Replace the solenoid (switch).
The solenoid windings are disconnected or the solenoid windings are short circuited: Replace the solenoid (switch).
The
Caterpillar parts catalog:
Parts liner Caterpillar catalog:
1220250
LINER GP-CAB
950F II, 960F, 966F II, 970F
950F II, 960F, 966F II, 970F
4E5154
LINER
950F, 950F II, 960F
950F, 950F II, 960F
4E5155
LINER
950F, 950F II
950F, 950F II
4E5157
LINER-LH
950F, 950F II
950F, 950F II
4E5156
LINER-RH
950F, 950F II
950F, 950F II
1247299
LINER
950F II
950F II
1247302
LINER
950F II
950F II
1247303
LINER
950F II
950F II
1247299
LINER
950F II
950F II
1247298
LINER
950F II
950F II
1247294
LINER
950F II
950F II
1247295
LINER
950F II
950F II
1252295
LINER
950F II
950F II
1247296
LINER
950F II
950F II
1378595
LINER AS-CAB
950G, 962G
950G, 962G
1346069
LINER AS-CAB
826G, 980G
826G, 980G
4E8033
LINER-CAB
990
990
1247303
LINER
950F II
950F II
1247302
LINER
950F II
950F II