AVSPARE.COM
parts catalog

LINES GP-HYDRAULIC 1247230 - Caterpillar



1247230 LINES GP-HYDRAULIC Caterpillar parts D9R LINES
Rating:
22
Alternative (cross code) number:
CA1247230
124-7230
1247230
Caterpillar 1247230 LINES GP-HYDRAULIC

Buy LINES GP-HYDRAULIC 1247230 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 1247230:

TRACK-TYPE TRACTOR  D9R   Caterpillar
  For full view, you need register

Information:


Illustration 1. Dimensions for fabrication of seal guide.
Illustration 2. Dimensions for fabrication of adapter.Disassembly Procedure
1. Remove the water pump according to your Service Manual. Use Illustration 3 for the location of the parts and their part numbers.2. Put the pump housing in a vise with soft jaws. Use a wrench to hold the impeller shaft and remove the 6V5019 Nut.3. Remove the 1W5645 Adapter from the shaft.4. Use a 1P510 Driver Group and a press to remove the 1W5646 Shaft, 9N5697 Seal Assembly and 2W3535 Impeller from the 1W5644 Housing.5. Remove the 1W5647 Spacer and 6V5014 Seal from the pump housing.6. Remove the 6V506 Ring with 1P1861 Snap Ring Pliers.7. Use a press and the 1P510 Driver Group to push the 1W5648 Spacer, 6V5118 Bearing Assembly and the 1W5649 Spacer from the housing.8. Use the 1P510 Driver Group to remove the 3K3771 Seal from the housing.9. Use the 1P510 Driver Group and a press to remove the 1W5646 Shaft from the 2W3535 Impeller.10. Remove the 9N5697 Seal Assembly from the shaft.
Illustration 3. Components of 1W6446 Water Pump Group and clearance between front housing and the vanes of the impeller.Assembly Procedure
1. Pack the 6V5118 Bearing Assembly with 2S3230 Bearing Lubricant. Put the 1W5649 Spacer between the halves of the bearing assembly. Use Illustration 3 for the location of the parts and their part numbers.2. Use a press to install the 1W5646 Shaft into the bearing assembly.3. Put a thin layer of the bearing lubricant on the lips of the 3K3771 Seal. Use the 1P510 Driver Group to install the seal in the 1W5644 Housing. The seal must be installed with the lip toward the bearing assembly.4. Put the fabricated seal guide in position on the shaft. Put the shaft and bearing assembly in position in the housing. See Illustration 4.
Illustration 4. Correct position of seal guide.5. Use the fabricated bearing adapter (counterbore down), the 1P510 Driver Group, and a press to push the shaft and bearing assembly into the housing. The outside bearing cup must make contact with the bottom of the counterbore in the housing. See Illustration 5.
Illustration 5. Installation of shaft and bearing assembly into the housing.6. Remove the tools from the shaft. Inspect the 3K3771 Seal to make sure the seal was not damaged and the lip is in the correct position.7. Put the 1W5648 Spacer in position and install the 6V506 Ring with 1P1861 Snap Ring Pliers.8. Put a thin layer of 2S3230 Bearing Lubricant on the lip of the 6V5014 Seal. Use the fabricated adapter and 1P510 Driver Group to install the seal in the housing. The lip of the seal must be toward the bearings. See Illustration 6.
Illustration 6. Installation of 6V5014 Seal.9. Put the 1W5647 Spacer in position in the housing.10. Install the 1W5645 Adapter on the shaft.11. Put 9S3263 Thread Lock on the threads of the 6V5019 Nut. Install the nut on the shaft. Tighten the nut to a torque of 170 15 N m (125 11 lb ft).
Do

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
D9R Track-Type Tractor Power Shift 8BL00001-00829 (MACHINE) POWERED BY 3408 Engine


Parts lines Caterpillar catalog:

6I0030 LINES GP-FUEL INJECTION
3408, 3408C, 3412C, 589, 631E, 637E, 657E, 768C, 769C, 771C, 834B, 988B, 988F, D8L, D9N, D9R, PM-565, PR-450, PR-450C
8N2304 LINES GP-AFTERCOOLER WATER
3408, 589, 631E, 637E, 657E, 988F, D8L, D9R
3560065 LINES GP-COUPLER
M313D, M315D, M316D, PIN GRAB
2999510 LINES GP-WINDOW WASHER
320D, 324D FM LL, 325D FM, 330D FM, 568 FM LL
3727087 LINES GP-AIR
D6T XL, D7E, D7E LGP
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.