AVSPARE.COM
parts catalog

LINES GP-DRAFT FRAME 2278282 - Caterpillar



2278282 LINES GP-DRAFT FRAME Caterpillar parts 621G, 627G LINES
Rating:
19
Alternative (cross code) number:
CA2278282
227-8282
2278282
Caterpillar 2278282 LINES GP-DRAFT FRAME

Buy LINES GP-DRAFT FRAME 2278282 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL SCRAPER,

Compatible equipment models: 2278282:

WHEEL SCRAPER  621G   627G   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

Installation Procedure
Note: Do not attempt to use this seal group for applications that do not have an aluminum oil pan. The mounting bolts that are used for oil pans that are made from steel will not accommodate the increased thickness of the new seal.The following procedure should be used during the installation of the seal:
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Thoroughly clean the mating surfaces of the oil pan and cylinder block. Remove all gasket material and old sealant from the mating surfaces. Ensure that you do not scratch the mating surfaces or gouge the mating surfaces of the oil pan or the cylinder block.
Inspect the cylinder block oil pan flange for excessive sealant at the housing joints. Remove any excessive sealant from the area at the gasket joint for the front housing, and the area at the gasket joint for the flywheel housing.
Use a shop towel and a suitable solvent in order to remove engine oil and grit from the mounting surfaces. The surfaces should be clean and dry prior to installing the new seal.
Apply a bead of 4C-9612 Silicone Sealant to the cylinder block oil pan flange in the location of the joint for the front housing, and in the location of the joint for the flywheel housing. Ensure that the joints are completely filled with sealant.
Illustration 1 g01024125
Dry fit the seal on the oil pan's sealing flange. Mark the locations of the seal's joints (1) on the oil pan's flange. After marking the joint locations, remove the seal. Apply a bead of 4C-9612 Silicone Sealant across the width of the flange at the location of the seal joints. Ensure that you apply enough sealant to this area of the flange in order to fill the gap that is in the sealing joint.
Install the four segments of the integral seal into place on the oil pan's sealing flange.
Apply a bead of 4C-9612 Silicone Sealant across the width of the gasket at each of the sealing joints (1). Spread the sealant into the joints of the seal. Ensure that you fill any gaps that may be present in the joints of the seal.
Position the oil pan onto the engine. Install the bolts into the oil pan and tighten the bolts finger tight. Torque the bolts to the following value.Torque for bolts ... 47 9 N m (35 7 lb ft)

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
621G Wheel Scraper CEP00001-UP (MACHINE)
627G Wheel Scraper CEZ00001-UP (MACHINE) POWERED BY C-9 Engine
621G Wheel Scraper DBX00001-UP (MACHINE)
627G Wheel Scraper DBZ00001-UP (MACHINE) POWERED BY C9 Engine
621G Scraper (US Military) KLK00001-UP (MACHINE)
621G Scraper (US Military) MEX00001-UP (MACHINE)


Parts lines Caterpillar catalog:

8W0575 LINES GP-STEERING
621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G
4T3751 LINES GP-EJECTOR
621E, 621F, 621G, 627E, 627F, 627G
2284477 LINES GP-FUEL
627G, 637D, 637E, 637G
1950328 LINES GP-ENGINE OIL
12H, 627G, 637D, 637E, 637G
8X6591 LINES GP-DRAFT FRAME
621F, 621G, 627F, 627G
1839389 LINES GP-HYDRAULIC
824G II, 825G II, 826G II
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.