AVSPARE.COM
parts catalog

LINES GP-DRAFT FRAME 2278292 - Caterpillar



2278292 LINES GP-DRAFT FRAME Caterpillar parts 623G LINES
Rating:
55
Alternative (cross code) number:
CA2278292
227-8292
2278292
Caterpillar 2278292 LINES GP-DRAFT FRAME

Buy LINES GP-DRAFT FRAME 2278292 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL SCRAPER,

Compatible equipment models: 2278292:

WHEEL SCRAPER  623G   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

Installation Procedure
Clean all parts and inspect all parts. If any parts are worn or damaged, use new Caterpillar parts for replacement.
Lubricate all seals with clean hydraulic fluid.
Illustration 1 g00707712
Typical example
Place ring (8) into position on swivel (4). Apply 9S-3263 Thread Lock Compound to the threads of the six bolts that secure the ring to the swivel. Install the six bolts and the washers to the swivel.
Install the seals and the O-ring seals to two adapters (9). Install the adapters to the swivel.
Illustration 2 g00706724
Typical example
Attach an appropriate nylon lifting sling and a hoist to swivel (4). The weight of the swivel is 43 kg (95 lb). Place the swivel into position in the work tool.
Illustration 3 g00741887
Note: Ensure that the orientation of the swivel is correct. The "O" stamping on the swivel should connect to the circuit that retracts the cylinders. The "B" stamping on the swivel must connect to the circuit that extends the cylinders.
Apply 9S-3263 Thread Lock Compound to the threads of the six bolts that secure ring (8) to the upper housing. Install the six bolts and the washers to the housing.
Illustration 4 g00706718
Typical example
Install the O-ring seals to two hose assemblies (7). Place the hoses into position on swivel (4). Install the eight bolts, the washers, and the four half flanges that secure the hoses to the swivel.
Illustration 5 g00706712
Typical example
Place lock plate (6) into position on the lower housing. Apply 9S-3263 Thread Lock Compound to the threads of the six bolts that secure the plate to the swivel. Install the six bolts and the washers.
Place lock (5) into position over lock plate (6). Install the two bolts and the washers that secure the lock to the lower housing.
Illustration 6 g00706710
Typical example
Connect two lines (3) to swivel (4).
Illustration 7 g00706335
Typical example
Apply 9S-3263 Thread Lock Compound to the threads of two bolts (1) that secure coupling (2) to the upper housing. Install the bolts and the washers to the coupler. Repeat this step for the remaining coupler.Note: The hydraulic system must be purged of air before the work tool can be returned to operation. Refer to Service Manual, "Hydraulic System Air - Purge".End By: If necessary, install the mounting bracket. Refer to Service Manual, "Mounting Bracket - Remove and Install".

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
623G Wheel Scraper CEW00001-UP (MACHINE)
623G Wheel Scraper DBY00001-UP (MACHINE)


Parts lines Caterpillar catalog:

2302624 LINES GP-WATER
621G, 623G, 627F, 627G, 657B
6G9615 LINES GP-CUSHION-HITCH & ACCUM
621E, 621F, 621G, 623E, 623F, 623G, 627E, 627F, 627G
1600667 LINES GP-AIR
621G, 623G, 627F, 627G, 657B
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.