AVSPARE.COM
parts catalog

LINES GP-AIR COMPRESSOR 2333661 - Caterpillar



2333661 LINES GP-AIR COMPRESSOR Caterpillar parts C7 LINES
Rating:
82
Alternative (cross code) number:
CA2333661
233-3661
2333661
Caterpillar 2333661 LINES GP-AIR COMPRESSOR

Buy LINES GP-AIR COMPRESSOR 2333661 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK ENGINE,

Compatible equipment models: 2333661:

TRUCK ENGINE  C7   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 6V-6080 Torque Multiplier 1
5P-1748 Socket 1 Start By:
Remove the governor drive. Refer to Disassembly and Assembly, "Governor Drive - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Remove the camshaft drive gear cover from the left side of the rear housing.
Remove the rear camshaft inspection cover from each side of the engine. Remove the camshaft timing pin from the storage location. Use the manual barring group in order to rotate the engine until the timing pins can be installed in the crankshaft and both camshafts.
Illustration 1 g00636506
Earlier
Illustration 2 g00636485
Later
Note: The later engine has an adapter for the governor drive that is mounted on the camshaft drive gear.
Lock the manual barring group in order to prevent the engine from rotating when bolt (4) is loosened.
Remove the timing pins from the crankshaft and the camshafts.
Use Tooling (A) in order to loosen bolt (4).
Remove bolt (4) and washer (3).
Remove bolts (2) and remove plate (5).
Place washer (3) between the camshaft and plate (5) and install bolt (4).
Install bolts (2) finger tight. Note: Ensure that bolt (4) is installed in order to hold camshaft drive gear (1) when the camshaft drive gear is pulled off the taper of the camshaft.
Tighten bolts (2) evenly in order to pull camshaft drive gear (1) off the taper of the camshaft.
Attach a suitable lifting device to camshaft drive gear (1). The weight of camshaft drive gear (1) is approximately 35 kg (77 lb). Remove bolts (2), bolt (4), plate (5), and washer (3). Remove camshaft drive gear (1) from the rear housing.

Caterpillar SIS machinery equipment:

Caterpillar SIS

Cat SIS web machinery list:

Caterpillar parts catalog
C7 On-highway Engine KAL00001-UP
C7 Engine for Combat and Tactical Vehicles FML00001-UP
C7 On-highway Engine YPG00001-UP


Parts lines Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.