AVSPARE.COM
parts catalog

LINES GP-COUPLER 3156311 - Caterpillar



3156311 LINES GP-COUPLER Caterpillar parts 950H, 962H, FUSION LINES
Rating:
45
Alternative (cross code) number:
CA3156311
315-6311
3156311
Caterpillar 3156311 LINES GP-COUPLER
Weight: 160 pounds 72 kg.

Buy LINES GP-COUPLER 3156311 Caterpillar genuine, new aftermarket tractor parts with delivery
QUICK COUPLER, WHEEL LOADER,

Compatible equipment models: 3156311:

QUICK COUPLER  FUSION  
WHEEL LOADER  950H   962H   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

Operating the Machine
Adjust the operator's seat.
Fasten the seat belt.
Start the engine.
Allow the engine to warm up for 3 to 5 minutes.
Before you move the machine, ensure that no one will be endangered.
Operate the machine in an open area. Check for proper operation of all controls and protective devices.
Raise all implements enough to clear any unexpected obstructions.
Illustration 1 g01205048
Push down on brake pedal (2). This will prevent the machine from moving.
Illustration 2 g00947078
Move parking brake switch (3) to the DISENGAGED position. Note: When parking brake switch (3) is disengaged, the transmission will automatically default to first speed range.
Illustration 3 g00947082
Move transmission direction selector (4) to the desired direction and to the desired speed. Release brake pedal (2) in order to release the brakes. Release brake pedal (2) in order to allow the machine to move.
Illustration 4 g00947093
Move the throttle control to the desired engine speed.
Check the service brakes. Note: The machine is capable of driving through the service brakes in the first speed range with the throttle control switch set at high idle.
Drive the machine forward for best visibility and for control. Changing Direction and Speed
Speed changes and directional changes at full engine speed are possible. However, deceleration is recommended when you change direction. This will maximize operator comfort.
Push decelerator pedal (1) downward in order to decrease the engine speed.
Push brake pedal (2) downward in order to stop the machine.
Rotate transmission direction selector (4) to the desired direction.
Push button (5) in order to upshift to the desired speed, or push button (6) in order to downshift to the desired speed.
Release the brake pedal.
Increase the engine speed by releasing the decelerator pedal. Note: If the machine is equipped with MVP, you can shift through the speed ranges automatically. If the "UPSHIFT" button is pressed and the button is held, the speed ranges will increment automatically at a frequency of 0.6 seconds per speed range. If the "DOWNSHIFT" button is pressed and the button is held, the speed ranges will decrease automatically at a frequency of 0.6 seconds per speed range.Normal Steering
Illustration 5 g00947094MVP equipped machines also have a steer assist function which causes the engine speed to increase as the operator requests a progressively sharper turn.Pull right steering brake/clutch control lever (8) toward the detent in order to make a gradual right turn. Pull right steering brake/clutch control lever (8) until you feel slight pressure. This will release the right steering clutch.Pull steering brake/clutch control lever (8) against the stop in order to make a sharp right turn. This applies the right brake. Pull left steering brake/clutch control lever (7) toward the detent in order to make a gradual left turn. Pull left steering brake/clutch control lever (7) until you feel slight pressure. This will release the left steering clutch.Pull steering brake/clutch control lever (7) against the stop in order to make a sharp left turn. This applies the left brake.Note: When the machine is under load, use the bulldozer blade tilt lever in order to aid steering. This technique allows full power to be

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts lines Caterpillar catalog:

7E4634 LINES GP-AIR
416C, 426C, 428C, 436C, 438C
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.