AVSPARE.COM
parts catalog

LINES GP- 3157153 - Caterpillar



3157153 LINES GP- Caterpillar parts LINES
Rating:
11
Alternative (cross code) number:
CA3157153
315-7153
3157153
Caterpillar 3157153 LINES GP-

Buy LINES GP- 3157153 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 31 g01450823
Install Tooling (G) in order to hold housing assembly (72) to the backing plate. Attach Tooling (H) and a suitable lifting device to the backing plate. The combined weight of housing assembly (72), impeller clutch (71), and the backing plate is approximately 181 kg (400 lb). Remove housing assembly (72), impeller clutch (71), and the backing plate from shaft assembly (70).
Illustration 32 g01450848
Remove thrust bearing (75), sleeve (76), and pins (77).
Attach Tooling (C) and a suitable lifting device to impeller hub (74). The combined weight of impeller (73) and impeller hub (74) is approximately 57 kg (125 lb). Remove impeller (73) and impeller hub (74) from housing assembly (72).
Illustration 33 g01450886
Remove plate (78). If necessary, remove four dowel pins (79) (not shown). Remove twelve bolts (80) (not shown). Remove sleeve bearing (81). Use two people in order to remove adapter (82). The weight of adapter (82) is approximately 25 kg (55 lb).
Illustration 34 g01451090
Remove impeller hub (74) from impeller (73).
Illustration 35 g01451093
Remove Tooling (G).
Attach Tooling (C) and a suitable lifting device to backing plate (83). The weight of backing plate (83) is approximately 25 kg (55 lb). Remove backing plate (83) from housing assembly (72).
Illustration 36 g01451107
Remove discs (84) and plates (85).
Illustration 37 g01451138
Remove piston (86).
Illustration 38 g01451140
Remove seals (87).
Illustration 39 g01451158
Remove thrust washer (88). Remove plate (89) (not shown) and two dowel pins (90) (not shown) that are located under thrust washer (88).
Illustration 40 g01451176
Remove bolts (91). Use two people in order to remove gear (92) and gear (93) as one unit. The combined weight of gear (92) and gear (93) is approximately 36 kg (80 lb). Remove bearing race (94) from gears (92) and (93).
Illustration 41 g01451184
Remove bolts (96) and retainer plates (98). Remove freewheel race (95). Remove seals (97) and seals (101).
Drive in locator pin (100) in order to remove seal carrier (99). Remove bearing (102) from carrier assembly (103).
Illustration 42 g02507258
Reposition carrier assembly (103), as shown. The weight of carrier assembly (103) is approximately 79 kg (175 lb).
Remove bolts (104) and bearing cage (105) from carrier assembly (103).
Remove lip seal (106) from bearing cage (105).
Illustration 43 g02507297
Attach Tooling (J) and a suitable lifting device to shaft assembly (70). The weight of shaft assembly (70) is approximately 26 kg (57 lb). Remove shaft assembly (70) from carrier assembly (103). Remove gasket (107).
Illustration 44 g02507336
Remove seals (112) and seal carrier (111). Remove bearing (110) from shaft (113). Remove seal (109) and seal carrier (108).


Parts lines Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.