AVSPARE.COM
parts catalog

LINES GP-AIR COMPRESSOR 3534681 - Caterpillar



3534681 LINES GP-AIR COMPRESSOR Caterpillar parts C9.3 LINES
Rating:
79
Alternative (cross code) number:
CA3534681
353-4681
3534681
Caterpillar 3534681 LINES GP-AIR COMPRESSOR

Buy LINES GP-AIR COMPRESSOR 3534681 Caterpillar genuine, new aftermarket tractor parts with delivery
INDUSTRIAL ENGINE,

Compatible equipment models: 3534681:

INDUSTRIAL ENGINE  C9.3   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

Blade Line Relief Valve
Position the machine on level ground.
Stop the engine.
Release the pressure in the hydraulic system. Refer to Testing and Adjusting, "Hydraulic System Pressure - Release".
Illustration 1 g02845957
Pump compartment (1) Pressure tap (delivery pressure)
Connect a 60000.0 kPa (8700.0 psi) pressure gauge to pressure tap (1) .
Start the engine.
Place the machine controls at the following settings: Engine speed at high idle, and AEC switch OFF. Refer to Testing and Adjusting, "Engine Performance - Test (Engine Speed)" for engine rpm settings.
Place the hydraulic activation control lever in the UNLOCKED position.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Illustration 2 g02846096
Main control valve (2) Line relief valve (head end of blade cylinder)
Illustration 3 g01459839
Line relief valve (4) Locknut (5) Adjustment screw
To adjust line relief valve (2) for the head end of the blade cylinder, move the blade control lever to the full LOWER position (full retraction of the blade cylinder). Hold the blade control lever in this position.
Check the line relief valve pressure setting of the blade cylinder at pressure tap (1) .
Return the blade control lever to the NEUTRAL position.
Loosen locknut (4) on blade line relief valve (2). Turn adjustment screw (5) until the pressure gauge reading at pressure tap (1) is 28000.0 - 30000.0 kPa (4061.0 - 4351.0 psi).Note: Turning adjustment screw (5) clockwise increases the pressure. Turning adjustment screw (5) counterclockwise decreases the pressure.Note: Always make final pressure adjustment on pressure rise.
Tighten locknut (4) to a torque of29 2 N m (21.0 1.0 lb ft.)

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts lines Caterpillar catalog:

2812865 LINES GP-ENGINE OIL
C-9, C9, C9.3, TH31-E61
3472250 LINES GP-EXHAUST
324E, 324E L, 324E LN, 329E, 329E L, 329E LN, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL, 627K, 725C, 950K, 962K, 966K, 966M, 966M XE, 972K, 972M, 972M XE, C13, C9.3
3493926 LINES GP-FUEL FILTER
12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD, C9.3
3378004 LINES GP-FUEL
2864C, 336E, 336E H, 336E HVG, 336E L, 336E LH, 336E LN, 336F L, 568 FM LL, 586C, C9.3
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.