AVSPARE.COM
parts catalog

LINES GP-AIR 3534731 - Caterpillar



3534731 LINES GP-AIR Caterpillar parts D9T LINES
Rating:
10
Alternative (cross code) number:
CA3534731
353-4731
3534731
Caterpillar 3534731 LINES GP-AIR

Buy LINES GP-AIR 3534731 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: 3534731:

TRACK-TYPE TRACTOR  D9T   Caterpillar
Number on catalog scheme:
 
  For full view, you need register

Information:

1. Mark and identify all wires for installation purposes.2. Remove two nuts (1) from the electric starting motors. Disconnect four ground cable assemblies (2).3. Remove the protective cover and the nut that holds positive cable assembly (3) and the wire assembly to the electric starting motor. Disconnect positive cable assembly (3) and the wire assembly from the electric starting motor.4. Remove nut (5) that holds the wire assembly to the electric starting motor. Disconnect the wire assembly from the electric starting motor.5. Remove three 12 point head bolts (4) that hold the electric starting motor. Using two people, remove the electric starting motor and the gasket. The weight of the starting motor is 36 kg (80 lb).6. Repeat steps 3 through 5 to remove the remaining electric starting motor. The following steps are for the installation of the electric starting motors. 7. Using two people, put the electric starting motor and the gasket in position on the machine.8. Install three 12 point head bolts (4).9. Put the wire assembly in position on the electric starting motor, and install nut (5). Tighten nut (5) to a maximum torque of 2.25 0.25 N m (20 2 lb in).10. Put cable assembly (3) and the wire assembly in position on the electric starting motor, and install the nut. Tighten the nut to a maximum torque of 30 4 N m (22 3 lb ft). Put protective cover in position over the nut.11. Repeat steps 7 through 10 for the remaining electric starting motor.12. Put four ground cable assemblies (2) in position on the electric starting motors, and install two nuts (1). Tighten nuts (1) to a maximum torque of 30 4 N m (22 3 lb ft).

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
DV232 Track Type Tractor NJH00001-UP (MACHINE) POWERED BY C18 Engine
D9T TRACK-TYPE TRACTOR TWG00001-UP (MACHINE) POWERED BY C18 Engine


Parts lines Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.