LINES GP-AUXILIARY HYDRAULIC 3598801 - Caterpillar

Illustration 3 g01626924
Illustration 4 g01626956
Remove guard (3). Remove guard (5) from drive shaft (4).
Illustration 5 g01626957
Remove bolts (6). Remove bolts (7). Remove bracket (8).
Illustration 6 g01627012
Remove bolts (9). Repeat for the other side.
Illustration 7 g01627013
Use Tooling (A), Tooling (B), and a suitable lifting device in order to remove drive shaft (4). The weight of drive shaft (4) is approximately 295 kg (650 lb).
Illustration 8 g01636357
Remove bolts (6). Remove spider (5). The weight of the spider (5) is approximately 20 kg (44 lb). Installation Procedure
Table 2
Required Tools
Tool Part Number Part Description Qty
A 189-0408 Shackle As 1
B 1U-9200 Lever Puller Hoist 2
Illustration 9 g01636430
Install spider (5). The weight of the spider is approximately 20 kg (44 lb). Install bolts (6) in a crisscross pattern. Tighten bolts to a torque of 1000 125 N m (738 92 lb ft).
Illustration 10 g01627818
Use Tooling (A), Tooling (B), and a suitable lifting device in order to install drive shaft (4). The weight of the drive shaft (4) is approximately 295 kg (650 lb).
Illustration 11 g01627820
Install bolts (9) in a crisscross pattern. Tighten bolts (9) to a torque of 1000 125 N m (738 92 lb ft). Repeat for the other side.
Illustration 12 g01627824
Install bracket (8). Install bolts (7) and (6).
Illustration 13 g01627825
Illustration 14 g01627826
Install guard (5) and guard (3) around the drive shaft (4).
Illustration 15 g01627830
Illustration 16 g01627920
Install guard (2) and guard (1). End By:
Remove the retaining cable and lower the truck body. Refer to Disassembly and Assembly, "Truck Body Retaining Cable - Remove and Install".