AVSPARE.COM
parts catalog

LINES GP- 5088475 - Caterpillar



5088475 LINES GP- Caterpillar parts LINES
Rating:
46
Alternative (cross code) number:
CA5088475
508-8475
5088475
Caterpillar 5088475 LINES GP-

Buy LINES GP- 5088475 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Illustration 1 g01513895
Note: After assembly, the sleeve bearings must not extend beyond either side face of the cylinder assembly. (1) 215-1906 Sleeve Bearing Quantity ... 2 Inside diameter ... 70.329 0.020 mm (2.7689 0.0008 inch) Outside diameter ... 83.135 0.013 mm (3.2730 0.0005 inch) (2) Torque for the plug ... 25 6 N m (18 4 lb ft)Note: Lubricate the threads of the head with clean grease before assembly. (3) Torque for the head ... 600 130 N m (440 95 lb ft)Note: After assembly, the sleeve bearings must not extend beyond either side face of the rod assembly. (4) 213-6682 Sleeve Bearing Quantity ... 2 Inside diameter ... 65.322 0.020 mm (2.5717 0.0008 inch) Outside diameter ... 78.125 0.013 mm (3.0758 0.0005 inch) (B) Outside diameter of the piston over two lands ... 120.15 0.03 mm (4.730 0.001 inch) (C) Bore of the cylinder assembly ... 120.65 0.08 mm (4.750 0.003 inch) (D) Bore of the head over four lands ... 65.28 0.03 mm (2.570 0.001 inch) (E) Diameter of the rod assembly ... 64.950 0.038 mm (2.5571 0.0015 inch) (5) Torque for the socket setscrew ... 25 6 N m (18 4 lb ft)Note: Apply 154-9731 Thread Lock Compound to the threads of the retainer before assembly. (6) Torque for the retainer ... 35 5 N m (26 4 lb ft) (7) Apply 1U-8846 Gasket Sealant to the bottom of the connector plate before assembly. (8) Lubricate the sealing lip of the buffer seal assembly lightly with the lubricant that is being sealed. (9) Lubricate the sealing lip of the U-cup seal lightly with the lubricant that is being sealed. (10) Lubricate the sealing lip of the wiper seal lightly with the lubricant that is being sealed. (11) Apply 4C-4032 Bearing Mount Compound to the wiper seal groove before assembly. (12) Torque for two bolts ... 47 9 N m (35 7 lb ft) (F) Protrusion of the spring pin in the cap and bearing assembly ... 2 mm (0.1 inch)


Parts lines Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.