LINK AS 4Z9064 - Caterpillar

Install 450-5365 Plate As (2) using the bolts and the washers retained in Step 1. 450-4581 Electronic Control Wiring Gp
Illustration 37 g03786977
(1) 6I-1418 Spacer (2) 8T-8911 Bolt (3) 8T-9655 Isolation Mount (4) 9M-1974 Hard Washer (5) 9N-0869 Hard Washer (6) 7X-0343 Bolt (7) 8T-4222 Plated Washer (8) 130-5300 Clip (9) 8T-4137 Bolt (10) 8T-4121 Hard Washer (11) 6D-4246 Clip (12) 450-4582 Control Harness As (13) 8T-4186 Bolt (14) 449-8718 Plate As (15) 304-5687 Electronic Control Module
Illustration 38 g03786996
(10) 8T-4121 Hard Washer (12) 450-4582 Control Harness As (13) 8T-4186 Bolt (14) 7K-1181 Cable Strap
Illustration 39 g03803715
Harness connector identification (12) 450-4582 Control Harness As (16) Rear harness connector (40 pins) (17) Ground (18) J2 connector (70 pins) (19) Splice connector (six pins) (20) J1 connector (70 pins)
Install Item (1) through Item (14). Refer to Illustration 37 through Illustration 39.Software
Illustration 40 g03800119
Caterpillar Electronic Technician (ET) service portPower Train ECM
Illustration 41 g03800116
Location of the Power Train ECM inside the operator station
Flash the Power Train ECM with 486-5012 Power Train Software Gp .Note: Flash files for the machine can be downloaded from SIS Web, Service Software Files.Engine ECM
Illustration 42 g03800117
Location of the Engine ECM
Flash the Engine ECM with the latest software. Refer to the information below in order to determine the correct software.
Ventilation Reduction (VR) engines - 469-8219 Engine Software
Tier 3 engines - 468-5199 Engine Software Note: Flash files for the machine can be downloaded from SIS Web, Service Software Files.Machine ECM
Illustration 43 g03800118
Location of the Machine ECM
Flash the Machine ECM with 454-5456 Machine Software Gp .Note: Flash files for the machine can be downloaded from SIS Web, Service Software Files.Caterpillar Monitoring System (CMS)
Illustration 44 g03816880
Location of the Caterpillar Monitoring System (CMS)
Flash the Caterpillar Monitoring System (CMS) with 454-5461 Monitor Software Gp .Note: Flash files for the machine can be downloaded from SIS Web, Service Software Files.