parts catalog

Link, drive 77050154 - Caterpillar

77050154 Link, drive Caterpillar parts Link
Alternative (cross code) number:
Caterpillar 77050154 Link, drive

Buy Link, drive 77050154 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 48
  For full view, you need register


Hot oil and hot components can cause personal injury. Do not allow hot oil or hot components to contact skin.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Refer to the Operation and Maintenance Manual, "Access Doors and Covers" for the location of the service points.
Illustration 1 g00930709
Install frame lock pin (1) .
Illustration 2 g00777843
Open drain valve (5) on oil filter housing (4) .
Loosen pressure test port (2) or oil sample valve (3) in order to vent oil filter housing (4) .
Remove oil filter housing (4) .
Remove the used element and discard the used element.
Clean oil filter housing (4) with a clean nonflammable solvent.
Clean the base of oil filter housing (4) .
Insert a new filter element into filter housing (4) .
Replace the filter housing base seal.
Install filter housing (4) .
Close drain valve (5) on oil filter housing (4) .
Illustration 3 g00795948
Slowly remove the cover for magnetic screen (6). Slowly remove the cover for supplemental magnetic screen (7). Allow the oil to drain into a suitable container.
Remove the magnetic screen tube assemblies.
Separate the magnets and the tube assemblies from the screens. Wash the screens and the tube assemblies in clean nonflammable solvent. Allow the screens to dry and allow the tube assemblies to dry.
Do not drop or rap magnets on hard objects, or damage can result. Replace damaged magnets.
Clean the magnets with a cloth or clean the magnets with a firm brush. Allow the magnets to dry.
Install the magnets and tube assemblies into the screens.
Install the screens.
Inspect the cover seals. If the cover seals are damaged, replace the cover seals.
Install the covers and tighten the bolts.
Start the engine.
With the parking brake engaged, run the engine at low idle in order to circulate the transmission oil.
Inspect all of the transmission components for leaks.
Illustration 4 g00986356
With the engine at low idle, maintain the oil level between the marks on dipstick (8). If necessary, add the oil through the filler tube .
Stop the engine.
Remove frame lock pin (1) and store the frame lock pin.

Caterpillar parts catalog:

Caterpillar parts catalog

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.