parts catalog

LOCK NUT 0004423 - Caterpillar

0004423 LOCK NUT Caterpillar parts LOCK
Alternative (cross code) number:
Caterpillar 0004423 LOCK NUT

Buy LOCK NUT 0004423 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 1 g00789726
Use the ET to calibrate the decelerator pedal sensor. Calibration is required in the following situations:
The decelerator pedal sensor is replaced or the decelerator pedal sensor is serviced.
The machine ECM is replaced or the ECM is removed for service.The ECM must detect the following conditions before starting the calibration procedure:
The parking brake is engaged.
The engine is running and set to high idle.
There are No Active Diagnostics.If any of these conditions are not met during the calibration, the procedure is aborted immediately.Use the ET in order to calibrate the decelerator pedal sensor. Select Service from the main menu. Then, select "CALIBRATION" from the drop-down menu. Select the decelerator pedal sensor from the selection menu. Follow the instructions that are provided. See Testing and Adjusting, "Cable (Deceleration Pedal) - adjust".

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.