AVSPARE.COM
parts catalog

LOCK 1C4148 - Caterpillar



1C4148 LOCK Caterpillar parts AP-1000, AP-800 LOCK
Rating:
68
Alternative (cross code) number:
CA1C4148
1C-4148
1C4148
Caterpillar 1C4148 LOCK
Weight: 0.21 pounds 0 kg.

Buy LOCK 1C4148 Caterpillar genuine, new aftermarket tractor parts with delivery
ASPHALT PAVER,

Compatible equipment models: 1C4148:

ASPHALT PAVER  AP-1000   AP-800   Caterpillar
Number on catalog scheme: 30
 
  For full view, you need register

Information:


Install grease fittings (1) as shown. Connect hose assembly (6) to tube assembly (8) using seal (12), flanges (16), bolts (21), and washers (23) .
Connect hose assembly (11) to tube assembly (9) using seal (13), flanges (15), bolts (22), and washers (23) .
Illustration 5 g02521600
(Y) Clips (3) 153-8800 Plate (4) 173-7916 Half Clamp (7) 253-6680 Support As (8) 344-4263 Tube As (9) 344-4264 Tube As (18) 7Y-4538 Half Clamp (19) 8T-4139 Bolt (23) 8T-4223 Hard Washer (24) 8T-4648 Bolt
Remove the bolts used to secure existing clips (Y). Position plates (3) on clips (Y). Position support assembly (7) on top of plates (3). Secure support assembly (7), plates (3), and existing clips (Y) by installing bolts (24) and washers (23)
Secure tube assembly (9) to support assembly (7) using clamps (4), bolts (19) and washers (23) .
Secure tube assembly (8) to support assembly (7) using clamps (18), bolts (19) and washers (23) .
Illustration 6 g02521602
(X) Clamps (4) 173-7916 Half Clamp (5) 247-9229 Tube As (8) 344-4263 Tube As (9) 344-4264 Tube As (10) 344-4265 Tube As (12) 1P-3703 Rectangular Seal (14) 1P-3705 Hard Washer (17) 7X-0584 Hard Washer (18) 7Y-4538 Half Clamp (19) 8T-4139 Bolt (20) 8T-4183 Bolt (21) 8T-4184 Bolt (23) 8T-4223 Hard Washer
Connect tube assembly (9) to tube assembly (10) using seal (14), bolts (20), and washers (17).
Remove the bolts that secure existing clamps (X) on the right side of the boom.
Position clamps (4) around tube assembly (10). Secure clamps (4) and existing clamps (X) using bolts (21) and washers (23) .
Connect tube assembly (5) to tube assembly (8) using seal (12), bolts (19), and washers (17).
Remove the bolts that secure existing clamps (X) on the left side of the boom.
Position clamps (18) around tube assembly (5). Secure clamps (18) and existing clamps (X) using bolts (21) and washers (23) .
Illustration 7 g02521604
(2) 153-8798 Plate (4) 173-7916 Half Clamp (5) 247-9229 Tube As (10) 344-4265 Tube As (18) 7Y-4538 Half Clamp (19) 8T-4139 Bolt (21) 8T-4184 Bolt (23) 8T-4223 Hard Washer
Position plate (2) on the right side of the boom and secure using bolts (21) and washers (23). Secure tube assembly (10) to plate (2) using clamps (4), bolts (19), and washers (23) .
Position plate (2) on the left side of the boom and secure using bolts (21) and washers (23). Secure tube assembly (5) to plate (2) using clamps (18), bolts (19), and washers (23) .
Tighten all hardware to standard torque. Refer to Specifications, SENR3130, "Torque Specifications".
Illustration 8 g00687600
Personal injury or death can result from escaping fluid under pressure.Escaping fluid under pressure, even a very small pin-hole size leak, can penetrate body tissue, causing serious injury, and possible death.Always use a board or cardboard

Caterpillar parts catalog:

Caterpillar parts catalog
AP-1000 Asphalt Paver 1HD00001-UP (MACHINE) POWERED BY 3116 Engine


Parts lock Caterpillar catalog:

1W2715 LOCK-RETAINER
120H, 120H ES, 120H NA, 120K, 120K 2, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 135H NA, 140G, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 160K, 160M, 160M 2, 160M 3, 160M 3 AWD, 205B, 214B, 224B, ...
1560235 LOCK
120H, 120H ES, 120H NA, 135H, 135H NA, 30/30, 3114, 3116, 3126, 3126B, 3126E, 320B, 322B L, 322B LN, 322C, 322C FM, 325, 325B L, 325C, 35, 446B, 446D, 45, 525B, 533, 535B, 539, 543, 55, 550, 570, 574,...
5P0370 LOCK PIN
35, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 424D, 426C, 428C, 428D, 428E, 430D, 430E, 430F, 432D, 432E, 434E, 436C, 438C, 438D, 442D, 442E, 444E, 446, 446B, 446D, 45, 450E, 55, 564, 574B, 657E...
5P8837 LOCK PIN
10, 302.2D, 302.4D, 302.5, 302.5C, 302.7D, 303, 303.5, 303.5C, 303.5D, 303C CR, 304, 304.5, 304C CR, 304D CR, 305, 305C CR, 330B L, 330C, 330C L, 330D L, 336D L, 336E HVG, 345B II, 345B L, 345C, 345C ...
6I3033 LOCK
120H, 120H ES, 120H NA, 135H, 135H NA, 205B, 214B, 30/30, 3114, 3116, 3126, 320 L, 320B, 322B, 322B L, 322B LN, 322C, 322C FM, 325, 325 L, 325 LN, 325B, 325B L, 35, 45, 533, 543, 55, 613C II, 918F, 92...
0871879 LOCK
AP-1000, AP-1050, AP-800
8C7130 LOCK
AP-1000, AP-800
0773863 LOCK
CB-314, CS-551
0871879 LOCK
AP-1000, AP-1050, AP-800
2406291 LOCK
R1600G, R1700G, R2900G
2290935 LOCK-SWING ARM
R1600, R1600G, R1700G
0674435 LOCK PIN
AP-1000B, AP-1055B, AP-650B, AP-800C, AP-800D, AP-900B, BG-225B, BG-225C, BG-2455C, BG-245C
1091526 LOCK PIN
AP-800C, BG-225B
5E8569 LOCK-NYLON
AP-1000B, AP-800C, BG-225B, BG-225C, BG-245C, PR-105
1855432 LOCK
AP-1055D, AP-800C, AP-800D, AS2251, AS2252C, AS2301, AS2302, BG-225B, BG-2455D, BG-260D
8I0368 LOCK-TAB
10 FT, 10-20B, 10B, 8 FT, 8-16B, AP-1055D, AP-655C, AP-800C, AP-800D, AS2251, AS2301, AS3251C, AS3301C, BG-225B, BG-2455C, BG-2455D, BG-260D
8C7130 LOCK
AP-1000, AP-800
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.