AVSPARE.COM
parts catalog

LUBRICATOR 3/8 1C4182 - Caterpillar



1C4182 LUBRICATOR 3/8 Caterpillar parts LUBRICATOR
Rating:
71
Alternative (cross code) number:
CA1C4182
1C-4182
1C4182
Caterpillar 1C4182 LUBRICATOR 3/8
Weight: 1 pounds 0 kg.

Buy LUBRICATOR 3/8 1C4182 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


View Under Cab From Right Side - Typical7. Remove two bolts (12) from bracket (11) and let the bracket down out of the way.
View Under Cab From Right Side - Typical8. Remove bolt (13) and the washer that hold straps (14), hose (15) and cable (16) to the machine frame. Lower hose (15) and cable (16) out of the way.
Typical9. Remove mat (17) and pad (18) from cab floor.
View Inside Of Cab - Typical
View Under Cab From Right Side - Typical10. Remove Four bolts (19), then lower plate (21) and metering pump (22) out of the way. Remove four mountings (20) from between bolts (19) and plate (21).
View Under Cab From Right Side - Typical11. Remove cable straps (23) and (25) from wire harness assembly (24) and plug-receptacle assemblies (26). Disconnect plug-receptacle assemblies (26) and move wire harness assembly (24) out of the way.
View Under Cab From Right Side - Typical12. Remove cable strap (28). Identify the location of three plug-receptacle assemblies (27) for assembly purposes. Disconnect plug-receptacle assemblies (27) and let wire harnesses (29) lower out of the way.
View Under Cab From Right Side - Typical13. Remove nut (30) and the washer that hold ground strap (31) to the frame. Remove ground strap (31) and lower it out of the way.
View Under Cab From Right Side - Typical14. Identify the location of plug-receptacle assemblies (32) for assembly purposes. Disconnect plug-receptacle assemblies (32). Remove two cable straps (33) from two wire harnesses (34) and lower the wire harnesses out of the way.
Typical15. Remove two bolts (35) and the washers that hold plate (36) to the machine frame. Lower plate (36) out of the way.
View In Cab From Right Side - Typical16. Remove two truss head screws (37) from cover assembly (38).
View Of Cover Assembly (38) From Above - Typical17. Remove two truss head screws (39) from cover assembly (38).
Typical18. Remove cover assembly (38) from the hydraulic control console.
Typical19. Put identification marks on hydraulic hoses (40) for installation purposes.20. Disconnect hoses (40) that can be reached with a wrench.
Typical21. Cut cable strap (46) from support assembly (44) to free the wire harness. Remove four nuts (41) and the washers that hold cover (43) to support assembly (44). Lift cover (43) up and over support assembly (44), then lower cover (43), control handles (42) and pilot valve group (45) (as a single unit) to the floor of the cab.
Typical22. Put identification marks on hydraulic hoses (47) for installation purposes.23. Disconnect hydraulic hoses (47).
Typical24. Identify the location of plug-receptacles (48) for installation purposes. Disconnect plug-receptacle assembly (48).25. Remove cover (43), control handles (42) and pilot valve group (45) (as a single unit) from the cab.
Typical26. Identify the location of hydraulic hose (49) for installation purposes, then disconnect the hydraulic hose.
Typical27. Remove screws (51), and remove cover (50) from the cab.
Typical
Typical28. Remove screws (53) and (54) from cover (52).
Typical29. Remove screw (55) and bolts (56).
Typical30. raise cover (52), and disconnect plug-receptacle assembly (57).31. Remove cover (52) from the cab.
Typical32. Remove bolt (59),


Parts lubricator Caterpillar catalog:

1266644 LUBRICATOR GP-AIR
PM-201, PM-465, PM-565, PM-565B, PR-450C
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.