AVSPARE.COM
parts catalog

483-7385 WIRING GP-PLATFORM S/N KK61-UP PART OF 483-7401 ELECTRICAL AR 854K WHEEL DOZER




ELECTRICAL AND STARTING SYSTEM

WIRING GP
 
#M00847470420
 

483-7385: WIRING GP-PLATFORM

483-7385 WIRING GP-PLATFORM
S/N KK61-UP
PART OF 483-7401 ELECTRICAL AR
i06712191 M0084747
  For full view, you need register

Parts for your 854K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [7] STRAP-CABLE  
2. 124-3019 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
3. 312-4646 [1] BRACKET AS  
4. 326-8069 Y [1] HARNESS AS-PLATFORM  
5. 376-7257 Y [1] SWITCH GP-PRESSURE (BRAKE CASE DRAIN)  
5A. 376-7257 Y [1] SWITCH GP-PRESSURE (IMPLEMENT CASE DRAIN)  
5B. 376-7257 Y [1] SWITCH GP-PRESSURE (FAN MOTOR BYPASS)  
6. 130-5300 [4] CLIP  
7. 204-2281 [15] STRAP-CABLE  
8. 204-8000 [15] MOUNTING-CABLE TIE  
9. 3J-1907 [3] SEAL-O-RING  
10. 4P-7581 [3] CLIP (LADDER)  
11. 5F-9144 [3] SEAL-O-RING  
12. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
14. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
15. 8T-4195 M [14] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 
#M00847470421
 

326-8073: WIRING GP-POWER TRAIN

326-8073 WIRING GP-POWER TRAIN
S/N KK61-UP
PART OF 483-7401 ELECTRICAL AR
i05162396 M0084747
  For full view, you need register

Parts for your 854K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 C [17] STRAP-CABLE  
2. 124-3019 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
3. 183-3681 [1] BRACKET AS  
4. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
5. 193-5576 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
6. 204-2281 B [11] STRAP-CABLE  
7. 256-6453 [2] SENSOR-TEMPERATURE (2-PIN)(PILOT OIL)  
8. 289-0672 [1] BRACKET  
9. 160-8708 [2] BRACKET AS  
10. 344-7389 [1] SENSOR AS-PRESSURE (TORQUE CONV IMPELLER CLUTCH)  
11. 344-7391 [1] SENSOR-PRESSURE (EJECTOR)(HYDRAULIC FAN)  
12. 369-7049 [1] HARNESS AS-TRANSMISSION  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  6D-5256 [1] PLUG AS (14-PIN)  
  8T-8737 [17] PLUG-SEAL  
  9X-3401 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [23] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  114-8843 E SLEEVE-PLASTIC (100-CM)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  455-0704 [1] SEAL-CONNECTOR  
  274-3779 [1] CAP-SEAL  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
13. 377-8838 CY [1] HARNESS AS-SENSOR  
14. 372-7944 [1] BRACKET  
15. 130-5300 [1] CLIP  
16. 130-5301 [1] CLIP  
17. 132-5789 [5] CLIP (LADDER)  
18. 204-8000 B [11] MOUNTING-CABLE TIE  
19. 238-5080 [2] SEAL-O-RING  
20. 319-6209 [2] ADAPTER AS  
    (EACH INCLUDES)
  5P-8874 [1] ADAPTER  
  214-7568 [1] SEAL-O-RING  
21. 3J-1907 [2] SEAL-O-RING  
22. 4P-7429 [1] CLIP (LADDER)  
23. 4P-7581 C [5] CLIP (LADDER)  
24. 5P-2228 [1] BOLT (1/2-13X1-IN)  
25. 5P-6629 [2] GROMMET  
26. 6V-0826 [2] GROMMET  
28. 7C-4354 [3] CLIP  
29. 7X-7729 [2] WASHER (11X25X3-MM THK)  
30. 8M-2770 [3] CLIP (LOOP)  
31. 8T-4121 BC [24] WASHER-HARD (11X21X2.5-MM THK)  
32. 344-5675 M [7] NUT (M10X1.5-THD)  
33. 8T-4136 BCM [10] BOLT (M10X1.5X25-MM)  
34. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
35. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
36. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
37. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
38. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
39. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
40. 5P-6029 D LOCKWIRE (0.3-M)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 
#M00847470422
 

377-4808: WIRING GP-REAR

377-4808 WIRING GP-REAR
S/N KK61-UP
PART OF 374-6525 RIPPER AR
AN ATTACHMENT
i05982054 M0084747
  For full view, you need register

Parts for your 854K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 160-0564 [1] BRACKET AS  
2. 204-2281 [26] STRAP-CABLE  
3. 204-8000 [25] MOUNTING-CABLE TIE  
4. 208-5021 [1] LAMP GP-VIMS SERVICE INDICATOR (24-VOLT, LED, BLUE)  
5. 213-9100 [2] ALARM AS (BACKUP)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (29-CM)  
6. 377-4809 Y [1] HARNESS AS-CHASSIS  
7. 130-5300 [3] CLIP  
8. 4P-7581 [1] CLIP (LADDER)  
9. 5C-2890 M [3] NUT (M6X1-THD)  
10. 5P-9085 [2] CLIP (LOOP)  
11. 7K-1181 [4] STRAP-CABLE  
12. 7X-4780 [2] GROMMET  
13. 7X-7729 [1] WASHER (11X25X3-MM THK)  
14. 8T-4121 [33] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4133 M [2] NUT (M10X1.5-THD)  
16. 8T-4136 M [26] BOLT (M10X1.5X25-MM)  
17. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
18. 9X-6165 [1] WASHER (6.5X22X2.5-MM THK)  
19. 9X-7344 [2] GROMMET  
20. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 
#M00847470423
 

377-4814: WIRING GP-REAR

377-4814 WIRING GP-REAR
S/N KK61-UP
PART OF 374-6525 RIPPER AR
FOR USE WITH RIPPER ATTACHMENT
AN ATTACHMENT
i05914729 M0084747
  For full view, you need register

Parts for your 854K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [5] STRAP-CABLE  
2. 124-3019 [1] BRACKET AS  
3. 125-8534 [1] PLATE AS  
4. 189-3761 [1] BRACKET AS  
5. 204-8000 [2] MOUNTING-CABLE TIE  
6. 456-2594 Y [1] HARNESS AS-VALVE (WIRING)  
7. 204-2281 [3] STRAP-CABLE  
8. 381-2621 [1] MOUNTING-CABLE TIE  
9. 4P-7581 [2] CLIP (LADDER)  
10. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
12. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 
#M00847470424
 

483-7396: WIRING GP-ROPS

483-7396 WIRING GP-ROPS
S/N KK61-202
PART OF 483-7401 ELECTRICAL AR
i06692504 M0084747
  For full view, you need register

Parts for your 854K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [20] STRAP-CABLE  
2. 125-8534 [1] PLATE AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
3. 385-1468 Y [1] HARNESS AS-CHASSIS  
4. 394-1204 [1] BRACKET  
5. 204-2281 [22] STRAP-CABLE  
6. 204-8000 [22] MOUNTING-CABLE TIE  
7. 3S-7608 [1] CLIP  
8. 4P-7581 [1] CLIP (LADDER)  
9. 4S-1962 [1] CLIP (LOOP)  
10. 5G-3676 [2] GROMMET  
11. 8T-4121 [25] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4136 M [23] BOLT (M10X1.5X25-MM)  
13. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
14. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 
#M00847470425
 

483-7396: WIRING GP-ROPS

483-7396 WIRING GP-ROPS
S/N KK6203-UP
PART OF 483-7401 ELECTRICAL AR
i07619035 M0084747
  For full view, you need register

Parts for your 854K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [20] STRAP-CABLE  
2. 344-5675 CM [1] NUT (M10X1.5-THD)  
3. 394-1204 [1] BRACKET  
4. 204-2281 [22] STRAP-CABLE  
5. 204-8000 [22] MOUNTING-CABLE TIE  
6. 385-1468 Y [1] HARNESS AS-CHASSIS  
7. 3S-7608 [1] CLIP  
8. 4P-7581 [1] CLIP (LADDER)  
9. 4S-1962 [1] CLIP (LOOP)  
10. 5G-3676 [2] GROMMET  
11. 8T-4121 C [26] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4136 CM [22] BOLT (M10X1.5X25-MM)  
13. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
14. 8T-4195 CM [2] BOLT (M10X1.5X30-MM)  
15. 9X-9365 C [1] BRACKET (LAMP)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 
#M00847470426
 

457-2009: WIRING GP-SEAT

457-2009 WIRING GP-SEAT
S/N KK61-UP
PART OF 511-5569 KIT-SEAT BELT, 485-1945, 510-2931 SEAT BELT GP
AN ATTACHMENT
i06251695 M0084747
  For full view, you need register

Parts for your 854K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [4] STRAP-CABLE  
2. 479-1874 [1] HARNESS AS-CONSOLE (SEAT BELT)  
  232-0893 E CONDUIT-FLEXIBLE (6.2-MM ID)(60-CM)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [3] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3402 [3] SOCKET-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1768 [3] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  1P-0810 B TAPE-ELECTRICAL  
3. 132-5789 [1] CLIP (LADDER)  
4. 352-3964 [1] CLIP (LADDER)  
5. 4P-7581 [1] CLIP (LADDER)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 
#M00847470427
 

485-5423: WIRING GP-SEAT

485-5423 WIRING GP-SEAT
S/N KK61-UP
PART OF 421-1223 SUSPENSION GP-SEAT
AN ATTACHMENT
i06541374 M0084747
  For full view, you need register

Parts for your 854K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 479-1744 [1] BRACKET  
2. 3S-2093 [8] STRAP-CABLE  
3. 475-0258 [1] HARNESS AS-WIRING (SEAT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-4571 [2] TERMINAL-BLADE (14-GA TO 16-GA)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
 
#M00847470428
 

369-7042: WIRING GP-SENSOR

369-7042 WIRING GP-SENSOR
S/N KK61-UP
PART OF 339-1153 LINES GP-AFTERCOOLER AIR
i04462530 M0084747
  For full view, you need register

Parts for your 854K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [2] STRAP-CABLE  
2. 256-6453 [1] SENSOR-TEMPERATURE (2-PIN)  
3. 369-7057 [1] HARNESS AS-SENSOR  
  9X-3402 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  114-8843 E SLEEVE-PLASTIC (20-CM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
4. 132-5789 [1] CLIP (LADDER)  
5. 8L-2786 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
 
#M00847470429
 

486-3649: WIRING GP-SERVICE CENTER

486-3649 WIRING GP-SERVICE CENTER
S/N KK61-UP
PART OF 510-6205 ENCLOSURE AR-SERVICE CENTER
i06693993 M0084747
  For full view, you need register

Parts for your 854K WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8R-9137 [1] ANGLE  
2. 9X-6772 [10] STRAP-CABLE  
3. 467-8535 [1] SWITCH AS-START (KEY)  
  7T-6799 [1] NUT-MOUNTING (1-32-THD)  
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 117-2311 [1] SOCKET-AUXILIARY POWER (12-VOLT)  
5. 124-3019 [1] BRACKET AS  
6. 203-9007 [1] NUT (1-1/2-18-THD)  
7. 229-3177 [1] PLATE AS  
  6V-6716 [2] RIVET-TRUSS HEAD  
  109-1645 [1] CLIP  
8. 239-5025 Y [1] CONTROL GP-UNPRGMED MONITOR (MESSENGER)  
9. 246-2805 [1] BRACKET AS  
10. 270-2679 [1] LOCKWASHER  
11. 294-5076 [1] PLATE AS  
12. 329-7312 [1] FILM-IDENTIFICATION (CAT)  
13. 348-6705 [1] MODULE GP-KEYPAD (FLUID LEVEL)  
  8F-1326 [2] WASHER (4.2X9.5X0.8-MM THK)  
  8T-2659 M [2] LOCKNUT (M4X0.7-THD)  
14. 353-2834 [1] LAMP GP-FLOOD (24-VOLT)  
  9X-4244 M [2] SCREW-SPECIAL (M4X1.79X25-MM)  
  202-6614 [1] LENS AS  
  351-9918 [1] LAMP-HALOGEN (24-VOLT, 70-WATT)  
15. 353-2835 [1] BRACKET AS-MOUNTING  
16. 353-4515 [1] SWITCH GP-TOGGLE (ENGINE SERVICE LIGHT)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
17. 455-9568 [1] CAP AS  
  424-4322 [1] COVER-CONNECTOR  
18. 486-3648 Y [1] HARNESS AS-CONTROL  
19. 487-4129 [1] SHEET  
20. 487-4130 [1] FILM-IDENTIFICATION (CONTROL PANEL)  
21. 204-2281 [3] STRAP-CABLE  
22. 204-8000 [3] MOUNTING-CABLE TIE  
23. 238-0251 M [6] SCREW-BUTTON HEAD (M10X1.5X25-MM)  
24. 344-5675 M [1] NUT (M10X1.5-THD)  
25. 7X-4780 [1] GROMMET  
26. 7X-7729 [1] WASHER (11X25X3-MM THK)  
27. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
29. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
30. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
31. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
32. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM
WIRING GP
Operation and Maintenance Manual
Battery or Battery Cable - Inspect/Replace
854K Wheel Dozer
Cat Detect Object Detection - If Equipped
854K Wheel Dozer
Fuses - Replace
854K Wheel Dozer
Circuit Breakers - Reset
854K Wheel Dozer
Battery Disconnect Switch
854K Wheel Dozer
Engine Starting with Auxiliary Start Receptacle
854K Wheel Dozer
Seat Belt Reminder System
854K Wheel Dozer
Monitoring System
854K Wheel Dozer
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Installation Procedure for Mounting the Rear Radars On Certain Cat<SUP>&reg;</SUP> Products {1408, 1439, 5660, 7347}
Installation Procedure for Mounting the Rear Radars On Certain Cat® Products {1408, 1439, 5660, 7347}
Configure Tire Pressure Monitor Sensor on Certain K-Series Wheel Loaders and Dozers {1408, 1439, 4203}
Configure Tire Pressure Monitor Sensor on Certain K-Series Wheel Loaders and Dozers {1408, 1439, 4203}
Installation Procedure for Tire Pressure Monitoring Kit for 844K, 854K Wheel Dozers and 990K, 992K, and 994K Wheel Loaders {1408, 7490, 7494}
Installation Procedure for Tire Pressure Monitoring Kit for 844K, 854K Wheel Dozers and 990K, 992K, and 994K Wheel Loaders {1408, 7490, 7494}
Specifications
Temperature Sensor (Implement, Hydraulic Fan Oil) (Steering, Brake Oil)
854K Wheel Dozer Systems
Electronic Unit Injector Wiring
C27 and C32 Engines for Caterpillar Built Machines
Speed Sensor (Transmission Output)
854K Wheel Dozer Systems
Pressure Sensor (Torque Converter Impeller Clutch Oil)
854K Wheel Dozer Systems
Temperature Sensor (Torque Converter Oil)
854K Wheel Dozer Systems
Speed Sensor (Transmission Input)
854K Wheel Dozer Systems
Relay
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Transmission Hydraulic Control
854K Wheel Dozer Systems
STIC Control
854K Wheel Dozer Systems
Switches
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Circuit Breaker (Alarm)
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Circuit Breaker (Powered Stairway)
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Pressure Switch (Filter Bypass) - Differential
854K Wheel Dozer Systems
Transmission Hydraulic Control
854K Wheel Dozer Systems
Pressure Switch (Steering Cooler Filter Bypass) (Steering Pump Case Drain Filter Bypass)
854K Wheel Dozer Systems
Liquid Level Sensor (Implement, Hydraulic Fan Tank) (Steering, Brake Tank)
854K Wheel Dozer Systems
Oil Pressure Switch (Differential)
854K Wheel Dozer Systems
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Cat Machines
Parking Brake
854K Wheel Dozer
Transmission Hydraulic Control
854K Wheel Dozer
Axle Oil Cooler
854K Wheel Dozer
General Information
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Powered Stairway System
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Parking Brake - Interlock
854K Wheel Dozer
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Limit Switch (Parking Brake) - Check
854K Wheel Dozer
Electrical Connector - Inspect
854K Wheel Dozer
Wiring Harness (Open Circuit) - Test
854K Wheel Dozer
Wiring Harness (Short Circuit) - Test
854K Wheel Dozer
Electronic Control Module (ECM) - Configure
854K Wheel Dozer
Limit Switch (Stop Light) - Adjust
854K Wheel Dozer
Electrical Connector - Inspect
854K Wheel Dozer
Connector Contact Description
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G
Switch Status - Check
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Electronic Control Module (ECM) - Flash Program
854K Wheel Dozer
Electronic Control Module (ECM) - Replace
854K Wheel Dozer
Troubleshooting
Wiring Information
C27 and C32 Engines for Caterpillar Built Machines
Connector Locations
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
MID 082 - CID 0365 - FMI 04
844K and 854K Wheel Dozers and 990K, 992K, 993K, 994F and 994H Wheel Loaders Powered Access Stairway
Electrical Connectors - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Electrical Connectors
C27 and C32 Engines for Caterpillar Built Machines
Connector Locations
854K Wheel Dozer
Wiring Harness (Short Circuit) - Test
854K Wheel Dozer
Electrical Connector - Inspect
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G
Wiring Harness (Open Circuit) - Test
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G
Wiring Harness (Short Circuit) - Test
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G
Connector Locations
854K Wheel Dozer
Connector Contact Description
854K Wheel Dozer
Wiring Harness (Open Circuit) - Test
854K Wheel Dozer
CAN Data Link - Test
854K Wheel Dozer
ECM Location Code - Test
854K Wheel Dozer
Parameter - Test
854K Wheel Dozer
Data Link - Test
Landfill Compactors, Soil Compactors, Wheel Dozers, and Wheel Loaders VIMSTM 3G
Electrical Connector - Inspect
854K Wheel Dozer
System Schematic
854K Wheel Dozer
Service Magazine
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}

Caterpillar Parts SIS Catalog 854K :

Truck sale:

USD $992,088 
2012 CAT 854K

Hastings Deering (Australia) Ltd
USD $583,347 
2008 CAT 854K

Hastings Deering (Australia) Ltd
USD $472,234 
2010 CAT 854K

Hastings Deering (Australia) Ltd
USD $650,809 
2011 CAT 854K

Hastings Deering (Australia) Ltd
USD $583,347 
2011 CAT 854K

Hastings Deering (Australia) Ltd
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.