AVSPARE.COM
parts catalog

MANIFOLD 3156856 - Caterpillar



3156856 MANIFOLD Caterpillar parts 770G, 770G OEM, 772G, 772G OEM MANIFOLD
Rating:
20
Alternative (cross code) number:
CA3156856
315-6856
3156856
Caterpillar 3156856 MANIFOLD
Weight: 26 pounds 12 kg.

Buy MANIFOLD 3156856 Caterpillar genuine, new aftermarket tractor parts with delivery
TRUCK,

Compatible equipment models: 3156856:

TRUCK  770G   770G OEM   772G   772G OEM   Caterpillar
Number on catalog scheme: 7
 
  For full view, you need register

Information:


Illustration 1 g01205823
(1) Thickness of four new friction discs and three new clutch plates ... 28.50 0.95 mm (1.115 0.037 inch) Thickness of new 6Y-9373 Disc ... 4.70 0.18 mm (0.185 0.007 inch) Thickness of new 7T-6994 Plate ... 3.175 0.075 mm (0.1250 0.0030 inch) (5) Apply 5P-3413 Sealant before you install the four plugs. (6) Use the required shims in order to provide the following backlash in the bevel gears. ... 0.210 0.075 mm (0.0083 0.0030 inch)Note: Measure the backlash on three equally spaced teeth. (7) Inside diameter of new planetary gear ... 51.948 0.010 mm (2.0452 0.0004 inch) (8) Diameter of new planetary shaft ... 42.395 0.006 mm (1.6691 0.0002 inch) (9) Inside diameter of new planetary gear ... 58.298 0.010 mm (2.2952 0.0004 inch) (10) Diameter of new planetary shaft ... 42.395 0.008 mm (1.6691 0.0003 inch) (12) Thickness of four new friction discs and three new brake plates ... 28.50 0.95 mm (1.115 0.037 inch) Thickness of new 6Y-9373 Disc ... 4.70 0.18 mm (0.185 0.007 inch) Thickness of new 7T-6994 Plate ... 3.175 0.075 mm (0.1250 0.0030 inch) (13) Apply 5P-3413 Sealant to the flanges which contact the carriers. (14) Inside diameter of new planetary gear ... 51.948 0.010 mm (2.0452 0.0004 inch) (15) Diameter of new planetary shaft ... 42.395 0.008 mm (1.6691 0.0003 inch) (16) Torque for three bolts ... 50 10 N m (37 7 lb ft)Procedure for the Preload Torque of the Pinion Bearings
Gradually tighten nut (11). Then, check the torque. Measure the torque by rotation of the pinion within the bearings. The correct preload torque is 0.3 to 1.35 N m (2.66 to 12.0 lb in).
Bend the tab on the lockwasher into the slot on the nut.Procedure for the Preload Torque of the Carrier Bearings
Gradually tighten three equally spaced bolts (2). Then, check the torque. Measure the torque by rotation of the planetary carrier within the bearings. The correct preload torque is 2.25 to 4.0 N m (20 to 35 lb in).
Measure the gap between plate (3) and carrier housing (17). Select a shim pack (4) of equal thickness to the measurement.
Remove bolts (2) and install shim pack (4) .
Install bolts (2) and tighten the bolts.
Measure the torque and adjust the torque again in Step 1.

Caterpillar parts catalog:

Caterpillar parts catalog
770G Off-Highway Truck KD200001-UP (MACHINE) POWERED BY C15 Engine
772G Off-Highway Truck KE300001-UP (MACHINE) POWERED BY C18 Engine
772G Off-Highway Truck LTS00001-UP (MACHINE) POWERED BY C18 Engine
770G Off-Highway Truck ECM00001-UP (MACHINE) POWERED BY C15 Engine
772G Off-Highway Truck KEX00001-UP (MACHINE) POWERED BY C18 Engine
770G Off-Highway Truck KDH00001-UP (MACHINE) POWERED BY C15 Engine
770G OEM Off-Highway Truck RMD00001-UP (MACHINE) POWERED BY C15 Engine
772G OEM Off-Highway Truck RMH00001-UP (MACHINE) POWERED BY C18 Engine
770G OEM Off-Highway Truck TWA00001-UP (MACHINE) POWERED BY C15 Engine
772G OEM Off-Highway Truck TWB00001-UP (MACHINE) POWERED BY C18 Engine
770G OEM Off-Highway Truck RMA00001-UP (MACHINE) POWERED BY C15 Engine
772G OEM Off-Highway Truck RME00001-UP (MACHINE) POWERED BY C18 Engine
770G OFF-Highway Truck ECX00001-UP (MACHINE) POWERED BY C15 Engine
772G Off-Highway Truck LTX00001-UP (MACHINE) POWERED BY C18 Engine
773GC OFF HIGHWAY TRUCK RJZ00001-UP (MACHINE)


Parts manifold Caterpillar catalog:

3039502 MANIFOLD-CENTER
735B, 740B, 770G, 770G OEM, 772G, 772G OEM
2260959 MANIFOLD-OUTLET
R1300, R1600, R1600G
2260958 MANIFOLD AS
R1300, R1600, R1600G
1869789 MANIFOLD AS
R1600, R1600G, R1600H
1869608 MANIFOLD AS
R1600, R1600G, R1600H
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.