AVSPARE.COM
parts catalog

MANIFOLD GP- 3534613 - Caterpillar



3534613 MANIFOLD GP- Caterpillar parts MANIFOLD
Rating:
61
Alternative (cross code) number:
CA3534613
353-4613
3534613
Caterpillar 3534613 MANIFOLD GP-

Buy MANIFOLD GP- 3534613 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Table 4
Relief Valve Pressure Change With One Turn Of Adjustment Screw
Main relief valve 14400 kPa (2100 psi)
Crossover relief valves 3050 kPa (440 psi) Note: Pressure values in Table 4 are approximate values. Use a pressure gauge for adjustment.
Illustration 4 g02240859
Travel brake valve (left side)
(5) Locknut
(6) Adjustment screw
(7) Crossover relief valve (forward left travel)
(8) Crossover relief valve (reverse left travel)
(9) Locknut
(10) Adjustment screw
Mark the original position of the right forward travel crossover relief valve.
Loosen the locknut for the right forward travel crossover relief valve. Turn the adjustment screw clockwise by one half turn. Tighten the locknut.
Illustration 5 g03328754
(D) Track block
(3) Sprocket
Place track block (D) in sprocket (3) in order to block forward right travel.
Start the engine.
Place the hydraulic activation control lever in the UNLOCKED position.
Place the machine controls at the following settings: engine speed dial "10" and AEC switch OFF. Refer to Testing and Adjusting, "Engine Performance - Test (Engine Speed)" for engine rpm settings.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F).
Slowly move the right travel control lever to full FORWARD position.
Check the main relief valve pressure setting at pressure tap (2). The main relief valve pressure setting should be 35000 500 kPa (5076 73 psi).
Illustration 6 g02102305
Main relief valve
(A) Adjustment screw
(L) Locknut
Illustration 7 g02102306
Main relief valve (heavy lift)
(A) Adjustment screw
(L) Locknut
Loosen the locknut. Set the temporary main relief pressure to 37500 + 1500 - 2000 kPa (5439 + 218 - 290 psi). Tighten the locknut. Note: Turn the adjustment screw clockwise in order to increase the pressure. Turn the adjustment screw counterclockwise in order to decrease the pressure.Note: Always make final pressure adjustments on pressure rise.
Illustration 8 g03261818
Sprocket (left travel)
(D) Track block
(4) Sprocket
Place track block (D) in sprocket (4) in order to block forward left travel.
Slowly move the left travel control lever to full FORWARD position.
Check the pressure setting


Parts manifold Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.