MARKER-TERMINAL 3844347 - Caterpillar

3844347 MARKER-TERMINAL Caterpillar parts G3516H

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3844347
384-4347
3844347

Weight: 0.02 pounds 0 kg.

Buy MARKER-TERMINAL 3844347 Caterpillar genuine, new aftermarket tractor parts with delivery
GENERATOR SET,

Compatible equipment models: 3844347:

GENERATOR SET G3516H Caterpillar

Number on catalog scheme: 10

Caterpillar 3844347 Parts scheme MARKER-TERMINAL

For full view, you need register

Information:

Fasten Tooling (F) to shaft (68).
Remove shaft (68) and bearing (67) from the pump housing.
Illustration 45 g01117582
Use a suitable press in order to remove bearing (67) from shaft (68).
Illustration 46 g01117584
Use Tooling (L) in order to remove key (69) from shaft (68).
Illustration 47 g01117585
Remove gear (70) from the main pump housing. Slide the gear to the center of the housing and remove the gear from the top of the housing. Note: The gear is not symmetrical. Make sure that you mark the gear orientation before the gear is removed.
Illustration 48 g01117588
Use Tooling (M) in order to remove bearing (71). Disassembly Procedure for the Lower Pump Rotating Group
Illustration 49 g01117591
Use Tooling (G) in order to remove retaining ring (72) from the lower pump rotating group.
Illustration 50 g01117592
Remove plate (73).
Illustration 51 g01117593
Use Tooling (H) and a suitable press in order to remove bearing cone (74), bearing cup (75), shim (76), bearing cup (78), bearing cone (77), spacer (79), and bearing cup (80) from the shaft.
Place Tooling (H) on the outer edge of the bearing cup (80). Note: Do not push on the bearing cage.
Illustration 52 g01117594
Remove spacer (81).
Illustration 53 g01117595
Use Tooling (H) and a suitable press in order to remove bearing cone (82) from the shaft. Disassembly Procedure for the Upper Pump Rotating Group
Illustration 54 g01117598
Use Tooling (G) in order to remove retaining ring (83) from the shaft.
Illustration 55 g01117599
Remove plate (84) from the shaft.
Illustration 56 g01117600
Use Tooling (H) and a suitable press in order to remove bearing cone (85), bearing cup (86), shim (87), bearing cup (88), bearing cone (89), spacer (90), and bearing cup (91) from the shaft.
Place Tooling (H) on the outer edge of the bearing cup (91), as shown. Note: Do not push on the bearing cage.
Illustration 57 g01117602
Remove spacer (92).
Illustration 58 g01117604
Use Tooling (H) and a suitable press in order to remove bearing cone (93) from the shaft.