parts catalog

MTG GP- 5087728 - Caterpillar

5087728 MTG GP- Caterpillar parts MTG
Alternative (cross code) number:
Caterpillar 5087728 MTG GP-

Buy MTG GP- 5087728 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 1 g01446003
(1) The mating surfaces of both the studs and the frame must be clean and free from oil prior to the sealant's application. Apply 4C-5300 Sealant in a 3 mm (0.12 inch) continuous bead around the 200-0999 Studs' flanges. Install the 200-0999 Stud until the flange seats firmly against the inside surface of the chain box. (2) Torque for 100-3866 Bolts ... 240 40 N m (177 30 lb ft) (3) Tighten the 099-4691 Bolts to the following torque. ... 100 20 N m (74 15 lb ft)
Illustration 2 g01446013
(4) The measurement for play (B) in the 168-7572 Chain or the 191-9659 Chain should be taken on the slack side (C) of the chain. Side (D) is the taut side of the chain. Play (B) for the 168-7572 Chain or the 191-9659 Chain ... 12.50 2.50 mm (0.492 0.098 inch)
Illustration 3 g00677549
(5) Orient the chamfer of the 159-5793 Spacer toward the hydraulic motors.
Illustration 4 g01218050
(6) Install the 142-9036 Nuts in the above order and tighten to the following torque. ... 160 15 N m (118 11 lb ft)Torque the 142-9036 Nuts again in the above order, and tighten an additional 60 5 degrees.

Parts mtg Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.