AVSPARE.COM
parts catalog

NUT 1C4252 - Caterpillar



1C4252 NUT Caterpillar parts NUT
Rating:
66
Alternative (cross code) number:
CA1C4252
1C-4252
1C4252
Caterpillar 1C4252 NUT
Weight: 0.20 pounds 0 kg.

Buy NUT 1C4252 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

2. Fasten a hoist to the track as shown. Support the weight of the track, and install blocks (1) to hold the track away from the carrier roller. 3. Remove two bolts (3) and carrier roller (2) from bracket (4). 4. Remove four bolts (5) and bracket (4) from the track roller frame.Install Carrier Rollers
1. Put bracket (1) in position on the track roller frame, and install four bolts (2). 2. Install carrier roller (4) in bracket (1) until the end of the carrier roller shaft is even with surface (X) on bracket (1). If necessary, adjust the carrier roller to align with the track.3. Install two bolts (3). 4. Fasten a hoist to the track. Support the weight of the track, and remove blocks (5). Remove the hoist.5. Adjust the track. See Connection Of Track.Disassemble Carrier Rollers
Start By:a. remove carrier rollers 1. Remove plug (1) and drain the oil from the roller. 2. Hold collar assembly (2) in place, and remove ring (3). Remove the collar assembly from the roller.3. Remove the Duo-Cone seal from the collar assembly. 4. Remove O-ring seal (4) and Duo-Cone seal (5) from the roller. 5. Install two 1/4 in - 20 NC forged eyebolts in support assembly (7). Remove the support assembly from the roller. Remove O-ring seal (6) from the support assembly. 6. Remove three bolts (9) and cover (8) from the roller. 7. Bend the tabs of lock (10) away from the heads of the bolts.8. Remove bolts (11), lock (10) and plate (12).
Do not let shaft (14) fall when it is removed from bearing (13).
9. Use a press, and remove shaft (14) from bearing cone (13) and the roller.10. Remove bearing cone (13) from the roller. 11. Use a press, and remove bearing cone (15) from shaft (14). 12. If necessary, remove bearing cups (17) from roller (16).Assemble Carrier Rollers
1. Lower the temperature of bearing cups (2). Install the bearing cups in roller (1). 2. Heat bearing cone (3) to a maximum temperature of 135°C (275°F). Install bearing cone (3) on shaft (4).3. Install the shaft and bearing cone in the roller. 4. Heat bearing cone (6) to a maximum temperature of 135°C (275°F). Install the bearing cone on the shaft.5. Install plate (8) with the ground surface toward the shaft and bearing cone (6).6. Install lock (5) and bolts (7). Bend the ends of lock (5) against the head of bolts (7). 7. Put O-ring seal (10) in a mixture of soap and water, and install the O-ring seal on cover (9). 8. Put cover (9) in position on the roller, and install three bolts (11). 9. Put O-ring seal (12) in a mixture of soap and water, and install the O-ring seal on support assembly (13).10. Use two 1/4 in - 20 NC forged eyebolts, and install support assembly (13) in the roller.
See Installation Of Duo-Cone Floating Seals before installing any of the Duo-Cone seals.
11. Use Tool (A), and install Duo-Cone seal (15) in the support


Parts nut Caterpillar catalog:

1C3807 NUT
Caterpillar
1B9972 NUT
Caterpillar
1B8083 NUT
Caterpillar
1C4297 NUT
Caterpillar
1C4350 NUT
Caterpillar
1C4676 NUT
Caterpillar
1C9470 NUT
Caterpillar
1D0055 NUT
Caterpillar
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.