AVSPARE.COM
parts catalog

OPTION AR-REGIONAL 3534222 - Caterpillar



3534222 OPTION AR-REGIONAL Caterpillar parts 824H, 825H OPTION
Rating:
82
Alternative (cross code) number:
CA3534222
353-4222
3534222
Caterpillar 3534222 OPTION AR-REGIONAL

Buy OPTION AR-REGIONAL 3534222 Caterpillar genuine, new aftermarket tractor parts with delivery
SOIL COMPACTOR, WHEEL DOZER,

Compatible equipment models: 3534222:

SOIL COMPACTOR  825H  
WHEEL DOZER  824H   Caterpillar
  For full view, you need register

Information:


Table 1
Machine
System    Symptom    Diagnostic System Procedure    
Single Action, Two Pump
System 3
The most common work tool used on this system is a hammer (1)     Work tool does not function     Check the hydraulic circuit pilot pressure (F2 and f2 stem line). See Testing and Adjusting, RENR5509, "312C and 312CL Excavators Hydraulic System", "Relief Valve (Pilot) - Test and Adjust" or Testing and Adjusting, RENR5519, "315C and 315CL Excavators Hydraulic System", "Relief Valve (Pilot) - Test and Adjust".    
Check the circuit for the solenoid valve. See Troubleshooting, "Solenoid Valve (Work Tool)".
Work tool motion is too quick Check for the proper flow rate programmed in the monitor. See Testing and Adjusting, "Work Tool Parameter - Program".    
Check the work tool pressure switch. See Troubleshooting, "Pressure Switch (Work Tool)".
Check the flow control valve. See Testing and Adjusting, "System 11 Prime: Solenoid Valve (Proportional Reducing) - Calibrate".
Check that the solenoid valve for flow control is operating properly. See Testing and Adjusting, "Solenoid Valve (Proportional Reducing) - Output Test".
Work tool motion is too slow Check the flow control valve (NFC). See Testing and Adjusting, "System 11 Prime: Solenoid Valve (Proportional Reducing) - Calibrate".    
Check that the work tool pressure switch is operating properly. See Troubleshooting, "Pressure Switch (Work Tool)".
Check for the proper flow rate programmed in the monitor. See Testing and Adjusting, "Work Tool Parameter - Program".
Check that the solenoid valve for flow control is operating properly. See Testing and Adjusting, "Solenoid Valve (Flow Control) - Output Test".
AEC is not turned OFF by the operation of the work tool Check that the work tool pressure switch is operating properly. See Troubleshooting, "Pressure Switch (Work Tool)".    
Double Action, One Pump
System 5
The most common work tool for this system is a thumb. (2)     Work tool does not open or shut completely     Check the hydraulic circuit pilot pressure (f2 stem line). See Testing and Adjusting, RENR5509, "312C and 312CL Excavators Hydraulic System", "Relief Valve (Pilot) - Test and Adjust" or Testing and Adjusting, RENR5519, "315C and 315CL Excavators Hydraulic System", "Relief Valve (Pilot) - Test and Adjust".    
The AEC is not turned OFF by the operation of the work tool Check that the work tool pressure switch is operating properly. See Troubleshooting, "Pressure Switch (Work Tool)".    
Combined Action, Two Pumps Plus Auxiliary Valve
System 11 Prime
The most common work tool for this system is a shear. (3)     The work tool does not rotate clockwise when the button on the left joystick is pressed     Check the hydraulic circuit pilot

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
825H Soil Compactor AZW00001-UP (MACHINE) POWERED BY C15 Engine


Parts option Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.