AVSPARE.COM
parts catalog

OPTION AR-MACHINE 3534223 - Caterpillar



3534223 OPTION AR-MACHINE Caterpillar parts 834H OPTION
Rating:
29
Alternative (cross code) number:
CA3534223
353-4223
3534223
Caterpillar 3534223 OPTION AR-MACHINE

Buy OPTION AR-MACHINE 3534223 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL DOZER,

Compatible equipment models: 3534223:

WHEEL DOZER  834H   Caterpillar
  For full view, you need register

Information:

Test
Place the machine on level ground.
Stop the engine.
Release the pressure in the hydraulic system. Refer to Testing and Adjusting, "Hydraulic System Pressure - Release" .
Illustration 1 g00451300
Pump Compartment (1) Pressure tap (front pump delivery pressure) (2) Pressure tap (rear pump delivery pressure) (3) Pressure tap (power shift pressure)
Connect a 60000 kPa (8700 psi) pressure gauge to either pressure tap (1) or pressure tap (2) .
Illustration 2 g00451341
Pilot Oil Manifold Compartment (25) Pilot relief valve (26) Pressure tap (27) Adjustment screw (28) Locknut
Connect a 6000 kPa (870 psi) pressure gauge to pressure tap (26) .
Start the engine.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F) .
Place the machine controls at the following settings: Power Mode, engine speed dial "10" and AEC switch OFF .Reference: Make reference to Testing and Adjusting, "Operational Checks" for engine rpm settings.
Check the pilot relief valve setting at pressure tap (26) .Adjust
Loosen locknut (28) .
Turn adjustment screw (27) until the pressure gauge reading at pressure tap (26) is 4100 200 kPa (595 29 psi) .
Tighten locknut (28) to a torque of 16 1 N m (12 1 lb ft) .Note: Turning adjustment screw (27) clockwise increases the pressure. Turning adjustment screw (27) counterclockwise decreases the pressure.Note: Always make final pressure adjustments on pressure rise.Note: Normal operation of the engine and pumps are necessary for the pressure adjustment. If the results of the pressure adjustments are not correct, then the engine and the pump characteristic curve needs to be checked.

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts option Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.