AVSPARE.COM
parts catalog

OPTION AR-SERVICE 3534273 - Caterpillar



3534273 OPTION AR-SERVICE Caterpillar parts 834H OPTION
Rating:
31
Alternative (cross code) number:
CA3534273
353-4273
3534273
Caterpillar 3534273 OPTION AR-SERVICE

Buy OPTION AR-SERVICE 3534273 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL DOZER,

Compatible equipment models: 3534273:

WHEEL DOZER  834H   Caterpillar
  For full view, you need register

Information:

Preparation
Position the machine on level ground.
Stop the engine.
Release the pressure in the hydraulic system. Refer to Testing And Adjusting, "Hydraulic System Pressure - Release" .
Illustration 1 g00451300
Pump compartment (1) Pressure tap (front pump delivery pressure) (2) Pressure tap (rear pump delivery pressure) (3) Pressure tap (power shift pressure)
Connect a 60000 kPa (8700 psi) pressure gauge to pressure tap (2) .
Illustration 2 g00451406
Swing motor (21) Relief valve (right swing) (22) Relief valve (left swing) (23) Connector (24) Solenoid Valve For Swing Parking Brake
Disconnect connector (23) from the solenoid valve for swing parking brake (24) .
Start the engine.
Place the machine controls at the following settings: Power Mode, engine speed dial "10" and AEC switch OFF .Reference: Make reference to Testing And Adjusting, "Operational Checks" for engine rpm settings.
Increase the hydraulic oil temperature to 55° 5°C (131° 9°F) .Note: Move the swing control lever slowly and ensure that the swing parking brake is operating properly.Test
Slowly move the swing control lever for a full RIGHT swing operation and check the pressure for relief valve (21) at pressure tap (2) .
Return the swing control lever to the NEUTRAL position.
If the pressure reading at pressure tap (2) is not 26000 980 kPa (3750 140 psi), Replace the relief valve with a new relief valve.
Slowly move the swing control lever for a full LEFT swing operation and check the pressure for relief valve (22) at pressure tap (2) .
Return the swing control lever to the NEUTRAL position.
If the pressure reading at pressure tap (2) is not 26000 980 kPa (3750 140 psi), Replace the relief valve with a new relief valve.
Stop the engine.
Release the pressure in the hydraulic system. Refer to Testing And Adjusting, "Hydraulic System Pressure - Release" .
Connect connector (23) to the solenoid valve for swing parking brake (24) .

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
834H Wheel Dozer BTX00001-UP (MACHINE) POWERED BY C18 Engine


Parts option Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.