AVSPARE.COM
parts catalog

OPTION AR-LINKAGE 3966784 - Caterpillar



3966784 OPTION AR-LINKAGE Caterpillar parts 314D LCR OPTION
Rating:
22
Alternative (cross code) number:
CA3966784
396-6784
3966784
Caterpillar 3966784 OPTION AR-LINKAGE

Buy OPTION AR-LINKAGE 3966784 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR,

Compatible equipment models: 3966784:

EXCAVATOR  314D LCR   Caterpillar
  For full view, you need register

Information:

Removal Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop Products Guide" for tools and supplies suitable to collect and contain fluids on Caterpillar products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00736766
Remove breather assembly (2) from valve mechanism cover (1) .
Remove bolts (3) that hold valve mechanism cover (1) to valve cover base (4) .
Remove the seal from the valve mechanism cover.Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 2 g00736766
Illustration 3 g00611545
Bolt tightening sequence for the valve mechanism cover (A) Rear (B) Front
Position valve mechanism cover (1) and the seal on valve cover base (4). Cut the seal to length. Apply 4C-9612 Silicone Sealant on both sides of the seal joint.
Install bolts (3). Tighten the bolts in a numerical sequence to a torque of 9 N m (80 lb in).Note: Inspect the O-ring seal of the breather assembly. Replace the O-ring seal, if necessary.
Position breather assembly (2) on valve mechanism cover (1). Tighten the bolt for breather assembly (2) to a torque of 7 2 N m (62 18 lb in).

Caterpillar SIS machinery equipment:

Caterpillar SIS


Parts option Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.