PAD 4416211 - Caterpillar

AFFECTED PRODUCT
Model Identification Number
326F L WGL00713-00943, 945-947, 951
XFK00191-00194, 196, 202-240
326F LN HCJ00121-00137, 139, 141-148, 151-165
330F L MBX00147-00404, 406-426, 438, 440-448, 450, 452
WBA00111-00244, 250-255, 261, 263, 265, 267, 276
330F L OEM B3300101-00102
330F LN LBN00171-00222, 225-235, 237-244, 247-252, 254-274, 276-283, 290-291, 296-303, 305, 318
330F LN OEM LNX00101-00110
330F OEM B3200101-00104
HA300101
PARTS NEEDED
No parts needed for this program
ACTION REQUIRED
Rework the Engine Cooling Fan Map setting from "Standard Ambient" to "High Ambient" setting on the engine ECM via ET. Refer to the attached Rework Procedure.
SERVICE CLAIM ALLOWANCES
Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
0-1500 hrs,
0-12 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
This is a 0.5-hour job
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
1. Park the machine on a hard level surface, and ground the bucket/tool. Stop the engine. Refer to the Operation and Maintenance Manual.
2. Connect ET after key ON.
3. Start ET and click "Configuration Tool". Refer to Image1.1.1.
Image1.1.1
4. Click "Engine Fan Type Configuration". Refer to the Image1.2.1.
5. Double click "Engine Cooling Fan Map".
6. If it is set "Standard", change to "High Ambient".
Image1.2.1
7. Click "OK".
8. "Factory Password" is requested. Refer to Image1.3.1.
9. To obtain factory password, click the link and enter your CWS ID. Password will be shown.
10. Click "OK".
11. Disconnect ET and key OFF.
Image1.3.1