AVSPARE.COM
parts catalog

PANEL AS-LH 1246564 - Caterpillar



1246564 PANEL AS-LH Caterpillar parts 824G, 825G, 826G, 980G PANEL
Rating:
40
Alternative (cross code) number:
CA1246564
124-6564
1246564
Caterpillar 1246564 PANEL AS-LH
Weight: 45 pounds 20 kg.

Buy PANEL AS-LH 1246564 Caterpillar genuine, new aftermarket tractor parts with delivery
LANDFILL COMPACTOR, WHEEL LOADER,

Compatible equipment models: 1246564:

LANDFILL COMPACTOR  826G  
SOIL COMPACTOR  825G  
WHEEL DOZER  824G  
WHEEL LOADER  980G   Caterpillar
Number on catalog scheme: 12
 
  For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1P-7405 Eyebolt 1
B 138-7575 Link Bracket 2
C 138-7576 Link Bracket 2 Start By:
Remove the rear axle assembly. Refer to Disassembly and Assembly, "Oscillating Axle (Rear) - Remove".
Remove the axle shafts. Refer to Disassembly and Assembly, "Axle Shaft - Remove". Note: Cleanliness is an important factor. Before the removal procedure, clean the exterior of the component thoroughly. Cleanliness will help to prevent dirt from entering the internal mechanism.
Illustration 1 g01088133
Remove bolts (1), shims (2) and cover (3).
Illustration 2 g01088136
Typical example
Install Tooling (A) to pin (5). Remove pin (5).
Remove O-ring seal (4) from pin (5).
Illustration 3 g01088536
Remove manifold (7) from the axle housing.
Remove clip (6).
Remove yoke assembly (8).
Illustration 4 g01088537
Position the oscillating axle assembly in a suitable stand or on wood blocks with the pinion housing upward.
Attach Tooling (B) and a suitable lifting device to front trunnion support (9). The weight of front trunnion support (9) is approximately 87 kg (192 lb). Remove front trunnion support (9).
Illustration 5 g02742376
Illustration 6 g02742416
Remove 20 bolts (10).
Remove four special bolts (11). Note: Bolts (11) are longer.
Attach Tooling (C) and a suitable lifting device to the differential and bevel gear assembly. The weight of the rear differential and bevel gear assembly is approximately 415 kg (915 lb). Remove the differential and bevel gear assembly.
Illustration 7 g02742377
Remove O-ring seal (12).

Caterpillar parts catalog:

Caterpillar parts catalog
825G Soil Compactor 6RN00001-UP (MACHINE) POWERED BY 3406 Engine
826G Landfill Compactor 7LN00001-UP (MACHINE) POWERED BY 3406 Engine
4Q-1700 Compactor Ar-Loader Custom Product Support Literature for 980G Wheel Loader 9CM00001-UP (MACHINE) POWERED BY 3406C Engine
980G Wheel Loader 2KR00001-UP (MACHINE) POWERED BY 3406C Engine
980G Wheel Loader 9CM00001-UP (MACHINE) POWERED BY 3406C Engine
824G Wheel Tractor 4SN00001-UP (MACHINE) POWERED BY 3406C Engine


Parts panel Caterpillar catalog:

1793726 PANEL AS-FRONT
826G, 826G II, 826H, 836G, 836H, 988G, 988H
1793707 PANEL AS
826G, 826G II, 826H, 836H, 988H
1793725 PANEL
826G, 826G II, 826H, 836H, 988H
1159862 PANEL AS
824G, 825G, 980G, 980G II
1166376 PANEL AS
824G, 825G, 980G, 980G II
1250718 PANEL AS
824G, 825G, 980G, 980G II
1250720 PANEL AS
824G, 825G, 980G, 980G II
1154943 PANEL AS
824G, 825G, 980G, 980G II
7V5632 PANEL AS-OIL PAN
824G, 825G, 826C, 826G, 980C, 980G
4E8895 PANEL
966F II, 990
8R7195 PANEL
950F, 966F, 966F II, 980F, 980F II
1654801 PANEL
826G, 826G II, 826H, 836G, 836H, 950H, 962H, 966G II, 966H, 972G, 972G II, 972H, 980G II, 980H, 988G, 988H
1654796 PANEL AS-LOWER
826G, 826G II, 972G
1130003 PANEL AS
824G, 825G, 826G, 980G
1232995 PANEL
824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 834G, 834H, 836G, 836H, 950G, 962G, 966G, 972G, 980G, 988G, 988H
1246565 PANEL AS-RH
824G, 825G, 826G, 980G
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.