AVSPARE.COM
parts catalog

PANEL 2333209 - Caterpillar



2333209 PANEL Caterpillar parts 120M, 120M 2, 12M, 12M 2, 140M, 140M 2, 14M, 160M, 160M 2, 16M PANEL
Rating:
25
Alternative (cross code) number:
CA2333209
233-3209
2333209
Caterpillar 2333209 PANEL
Weight: 7 pounds 3 kg.

Buy PANEL 2333209 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compatible equipment models: 2333209:

MOTOR GRADER  120M   120M 2   12M   12M 2   140M   140M 2   14M   160M   160M 2   16M   Caterpillar
Number on catalog scheme: 3
 
  For full view, you need register

Information:


Table 1
Tools Needed Qty
3J-1907 O-Ring Seal 2
5P-1404 O-Ring Adapter (7/8-14 male x 9/16-18 female) 2
6V-3079 Pressure Hose Assembly 6
6V-3965 Nipple Assembly 2
6V-4143 Coupler Assembly 12
8S-2263 Spring Tester 1
8T-0857 Pressure Gauge ( 0 to 10000 kPa (0 to 1450 psi)) 6
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products.Dispose of all fluids according to local regulations and mandates.
When a slack adjuster strokes correctly, there is always a small amount of pressure on the piston in the service brakes after the brakes are released.Use the following procedure in order to check for a failure in a slack adjuster.
Make sure that there is enough air pressure in the system in order to engage the brakes.
Illustration 1 g00512551
(3) Pressure tap for the rear slack adjuster
Install a 8T-0857 Pressure Gauge ( 0 to 10000 kPa (0 to 1450 psi)) on pressure tap (1) of the rear slack adjuster.
Illustration 2 g00512550
(4) Pressure tap for the front slack adjuster
Install a 8T-0857 Pressure Gauge ( 0 to 10000 kPa (0 to 1450 psi)) on pressure tap (2) of the front slack adjuster. Note: Identification letters are embossed on the purge valves at the top of the brake housing. The purge valve for the parking brake is labelled with a "P". The purge valve for the service brake is labelled with an "S".
Illustration 3 g00335178
Front brake housing
(P) Purge valve for parking brakes
(S) Purge valve for service brakes
Illustration 4 g00285267
Remote purge valve (S) for rear brakes
Use the 5P-1404 O-Ring Adapter and a valved nipple to install a 8T-0857 Pressure Gauge ( 0 to 10000 kPa (0 to 1450 psi)) on purge valve "S". Note: Make sure that the system air pressure is at the maximum pressure.
Depress the service brake pedal in order to engage the brake.
The gauges should register the same readings.
Release the brakes.
The gauge that is connected to the purge port on the wheel should show a residual pressure when the service brakes are released.
Oil pressure at the rear wheels should be 59 kPa (8.6 psi).
Oil pressure at the front wheels should be 103 kPa (14.9 psi).Note: Low residual pressure indicates a failed slack adjuster. High residual pressure may indicate a failed slack adjuster or warped brake discs. Rotate the wheel and check for pressure fluctuations in order to determine if the brake discs are warped. The brake discs are probably warped if the pressure fluctuates. If the brake discs are warped, the brake discs should be replaced.
If a problem is indicated, remove the slack adjuster. See the procedure in "Check Of Small Piston Movement". Check Of Small Piston Movement
Illustration 5 g00336318
Check of small piston movement
Remove the piston from the housing.
Install a 6.35 mm (.250 inch) diameter by 31.8 mm (1.25 inch) long rod into

Cat SIS web machinery list:

Caterpillar parts catalog
16M Motor Grader B9H00001-UP (MACHINE) POWERED BY C13 Engine
14M Motor Grader B9J00001-UP (MACHINE) POWERED BY C11 Engine
160M Motor Grader B9L00001-UP (MACHINE) POWERED BY C9 Engine
120M Motor Grader B9N00001-UP (MACHINE) POWERED BY C6.6 Engine
140M Motor Grader B9M00001-UP (MACHINE)
160M Motor Grader B9E00001-UP (MACHINE) POWERED BY C9 Engine
12M Motor Grader B9R00001-UP (MACHINE) POWERED BY C6.6 Engine
140M Motor Grader B9D00001-UP (MACHINE)
12M Motor Grader B9F00001-UP (MACHINE) POWERED BY C6.6 Engine
120M Motor Grader B9C00001-UP (MACHINE) POWERED BY C6.6 Engine
120M Motor Grader - All Wheel Drive B9W00001-UP (MACHINE) POWERED BY C6.6 Engine
120M Motor Grader - All Wheel Drive D9W00001-UP (MACHINE) POWERED BY C6.6 Engine
140M Motor Grader - All Wheel Drive B9G00001-UP (MACHINE) POWERED BY C9 Engine
140M Motor Grader - All Wheel Drive D9G00001-UP (MACHINE) POWERED BY C9 Engine
160M Motor Grader - All Wheel Drive B9T00001-UP (MACHINE) POWERED BY C9 Engine
160M Motor Grader - All Wheel Drive D9T00001-UP (MACHINE) POWERED BY C9 Engine
160M Series 2 MOTOR GRADER R9L00001-UP (MACHINE) POWERED BY C9 ENGINE
12M Series 2 Motor Grader R9S00001-UP (MACHINE) POWERED BY C9.3 Engine
140M Series 2 Motor Grader R9M00001-UP (MACHINE) POWERED BY C9 Engine
120M Series 2 Motor Grader - All Wheel Drive R9W00001-UP (MACHINE) POWERED BY C7.1 Engine
140M Series 2 Motor Grader - All Wheel Drive R9G00001-UP (MACHINE) POWERED BY C9 Engine
160M Series 2 MOTOR GRADER R9T00001-UP (MACHINE)
140M Series 2 Motor Grader M9D00001-UP (MACHINE) POWERED BY C9.3 Engine
140M Series 2 Motor Grader - All Wheel Drive M9J00001-UP (MACHINE) POWERED BY C9.3 Engine
160M Series 2 Motor Grader - All Wheel Drive M9K00001-UP (MACHINE) POWERED BY C9.3 Engine
120M Series 2 Motor Grader - All Wheel Drive M9H00001-UP (MACHINE) POWERED BY C7.1 Engine
160M Series 2 Motor Grader M9E00001-UP (MACHINE) POWERED BY C9 Engine
120M Motor Grader R9A00001-UP (MACHINE) POWERED BY C6.6 Engine
12M Motor Grader R9B00001-UP (MACHINE) POWERED BY C6.6 Engine
120M Motor Grader - All Wheel Drive R9C00001-UP (MACHINE) POWERED BY C6.6 Engine
120M Series 2 Motor Grader M9C00001-UP (MACHINE) POWERED BY C7.1 Engine
120M Series 2 Motor Grader R9N00001-UP (MACHINE) POWERED BY C7.1 Engine
14M Motor Grader R9J00001-UP (MACHINE) POWERED BY C11 Engine
16M Motor Grader R9H00001-UP (MACHINE) POWERED BY C13 Engine
12M Series 2 Motor Grader - All Wheel Drive R9P00001-UP (MACHINE) POWERED BY C9.3 Engine
12M Series 2 Motor Grader - All Wheel Drive F9B00001-UP (MACHINE) POWERED BY C9.3 Engine
12M Series 2 Motor Grader F9M00001-UP (MACHINE) POWERED BY C9.3 Engine


Parts panel Caterpillar catalog:

2940997 PANEL-DASH
120M, 12M, 140M, 160M
3457256 PANEL AS
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
3457278 PANEL
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
3451172 PANEL AS-ENCLOSURE
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
3451175 PANEL AS-ENCLOSURE
120M 2, 12M 2, 12M 3, 12M 3 AWD, 140M 2, 140M 3, 140M 3 AWD, 160M 2, 160M 3, 160M 3 AWD
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.