parts catalog

PEDAL 2H9360 - Caterpillar

2H9360 PEDAL Caterpillar parts PEDAL
Alternative (cross code) number:
Caterpillar 2H9360 PEDAL
Weight: 15 pounds 6 kg.

Buy PEDAL 2H9360 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Illustration 1 g00987750
Checking the end play of the camshaft
(1) End play of a camshaft ... 0.126 to 0.558 mm (0.0050 to 0.0220 inch)Maximum permissible end play of a worn camshaft ... 0.62 mm (0.0244 inch)
Illustration 2 g01195129
Typical example
(2) Bolt Tighten the bolt to the following torque. ... 95 N m (70 lb ft) (3) The diameters of the camshaft journals are given in the following tables.
Table 1
Camshaft Journals Standard Diameter
1 50.711 to 50.737 mm (1.9965 to 1.9975 inch)
2 50.457 to 50.483 mm (1.9865 to 1.9875 inch)
3 49.949 to 49.975 mm (1.9665 to 1.9675 inch) Maximum wear on the camshaft journals ... 0.05 mm (0.0021 inch)Check the camshaft lobes for visible damage. If a new camshaft is installed you must install new lifters.

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.