parts catalog

PEDAL A.-BRAKE 2H9383 - Caterpillar

2H9383 PEDAL A.-BRAKE Caterpillar parts PEDAL
Alternative (cross code) number:
Caterpillar 2H9383 PEDAL A.-BRAKE
Weight: 0.010 pounds 0 kg.

Buy PEDAL A.-BRAKE 2H9383 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register


Removal Procedure
Table 1
Required Tools
Tool Part Number Description QTY
A 207-1600 Rubber Lubricant 1
207-1601(1) Rubber Lubricant 1
(1) For EAME OnlyStart By:
Remove the air compressor if the engine is equipped. Refer to Disassembly and Assembly, "Air Compressor - Remove and Install".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Illustration 1 g02144404
Disconnect harness assemblies (2). Remove bolt (1). Remove the bracket and speed-timing sensors (3).
If necessary, remove speed-timing sensors (3) from the bracket.
Illustration 2 g02132733
Remove O-ring seals (4). Installation Procedure
Install the speed-timing sensors (3) in reverse order. Note: Check the O-ring seals for wear or for damage. Replace the O-ring seals, if necessary.
Apply Tooling (A) to the O-ring seals.
Install speed-timing sensors (3). Seat speed-timing sensors (3) into the bracket. Install bolt (1). Tighten bolt (1) to a torque of 28 7 N m (21 5 lb ft). Connect harness assemblies (2).

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.