AVSPARE.COM
parts catalog

PENDULUM BASE 1C4138 - Caterpillar



1C4138 PENDULUM BASE Caterpillar parts PENDULUM
Rating:
16
Alternative (cross code) number:
CA1C4138
1C-4138
1C4138
Caterpillar 1C4138 PENDULUM BASE
Weight: 31 pounds 14 kg.

Buy PENDULUM BASE 1C4138 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

1. Remove oil supply tube (1) and suction bell and tube (2). 2. Remove bolts (3) that hold the oil pump to the cylinder block and remove oil pump (4).3. To install, put oil pump (4) in position on the cylinder block. Install the bolts the hold the oil pump to the cylinder block.4. Put clean engine oil on the O-ring seals of the tubes. 5. Install oil supply tube (1), suction bell and tube (2).End By:a. install oil panDisassemble Oil Pump 1304-015
Start By:a. remove oil pump 1. Remove the bolt and washer that hold the gear on the shaft.2. Use Tool (A) and remove drive gear (1) from the shaft. Remove the key from the shaft. 3. Remove retainer (3) for the bypass valve. Remove the spring and the bypass valve.4. Remove cover (2) from the pump body. 5. Use Tool (B) and remove the bearings from the cover. 6. Remove idler gear and drive gear (5) from pump body (4).7. Use Tool (B) and remove the bearings from pump body (4).Assemble Oil Pump 1304-016
1. Use Tool (A) to install the bearings in the pump body. Install the bearings so the joint in the bearings is 30 15 degreesfrom the center line of the oil pump outlet passage. 2. Install idler gear and drive gear (5) in oil pump body (4). Put clean engine oil on the bearings and the gears. 3. Use Tool (A) and install the bearings in cover (2). Install the bearings so the joint of the bearing bores toward oil pump outlet passage (6).4. Install bypass valve (7), spring (8) and the retainer. 5. Install the key on the shaft. 6. Install gear (1) on the shaft. Install the washer and bolt that hold the gear on the shaft. Be sure the pump turns freely after assembly.End By:a. install oil pump


Parts pendulum Caterpillar catalog:

7R0225 PENDULUM AS
PR-1000, PR-450C, PR-750B
1751517 PENDULUM-INDICATOR
906H, 908H, 966H, BA30, BP22
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.