AVSPARE.COM
parts catalog

PIN 1246609 - Caterpillar



1246609 PIN Caterpillar parts M318, M318C, M318C MH, M320, M322C, M325C MH PIN
Rating:
35
Alternative (cross code) number:
CA1246609
124-6609
1246609
Caterpillar 1246609 PIN
Weight: 25 pounds 11 kg.

Buy PIN 1246609 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEELED EXCAVATOR,

Compatible equipment models: 1246609:

WHEELED EXCAVATOR  M318   M318C   M318C MH   M320   M322C   M325C MH   Caterpillar
Number on catalog scheme: 4
 
  For full view, you need register

Information:


Illustration 1 g01907673
Typical example
The cast iron cylinder block for the C7.1 engine has six cylinders which are arranged in-line. The cylinder block is made of cast iron. The cylinder block provides support for the full length of the cylinder bores. The cylinder bores are machined into the block.The cylinders are honed to a specially controlled finish in order to ensure long life and low oil consumption.The cylinder block has seven main bearings which support the crankshaft. Thrust washers are installed on both sides of number 6 main bearing in order to control the end play of the crankshaft. The thrust washers can only be installed one way.Passages supply the lubrication for the crankshaft bearings. These passages are machined into the cylinder block.Cooling passages are cast into the cylinder block in order to allow the circulation of coolant.The cylinder block has a bush that is installed for the front camshaft journal. The other camshaft journals run directly in the cylinder block.The engine has a cooling jet that is installed in the cylinder block for each cylinder. The piston cooling jet sprays lubricating oil onto the inner surface of the piston in order to cool the piston.A Multi-Layered Steel (MLS) cylinder head gasket is used between the engine block and the cylinder head in order to seal combustion gases, water, and oil.Cylinder Head
Illustration 2 g03346701
Typical example
(1) Valve keepers
(2) Valve spring retainer
(3) Valve spring The engine has a cast iron cylinder head (5). The lower part of the inlet manifold (6) is integral within the cylinder head. There are two inlet valves and two exhaust valve for each cylinder. Each pair of valves (7) are connected by a valve bridge that is controlled by a pushrod valve system. The ports for the inlet valves are on the left side of the cylinder head. The ports for the exhaust valves are on the right side of the cylinder head. The valve stems move in valve guides that are integral in the cylinder head. There is a renewable stem seal (4) that fits over the top of the valve guide. The valve seats are replaceable.Pistons, Rings, and Connecting rods
Illustration 3 g02394336
Typical example
The pistons (9) have a Quiescent combustion chamber in the top of the piston in order to provide an efficient mix of fuel and air. The piston pin (8) is off-center in order to reduce the noise level. The position pin (8) is retained in the correct position by two circlips (3).The pistons have two compression rings (1) and an oil control ring (2). The groove for the top ring has a hard metal insert in order to reduce wear of the groove. The piston skirt has a coating of graphite in order to reduce the risk of seizure when the engine is new to reduce friction and improve fuel economy.The correct piston height is important in order to ensure that the piston does not contact the cylinder head. The correct piston height also ensures the efficient combustion of fuel which is necessary in order

Caterpillar parts catalog:

Caterpillar parts catalog
M320 Excavator 9PS00001-UP (MACHINE) POWERED BY 3116 Engine
M318 Excavator 8SS00001-UP (MACHINE) POWERED BY 3116 Engine
M322C Excavator BDY00001-02000 (MACHINE) POWERED BY 3056 Engine
M318C Material Handler BEB00001-02000 (MACHINE) POWERED BY 3056E Engine
M325C Material Handler PAN00001-UP (MACHINE) POWERED BY 3126B Engine
M322C Excavator BDY02001-UP (MACHINE) POWERED BY 3056E Engine
M318C Material Handler BEB02001-UP (MACHINE) POWERED BY 3056E Engine
M322C Excavator H2G00001-UP (MACHINE) POWERED BY 3056E Engine
M318C Excavator H2F00001-UP (MACHINE) POWERED BY 3056E Engine


Parts pin Caterpillar catalog:

1102158 PIN AS
M316C, M316D, M318, M318C, M318C MH, M318D, M320, M322C, M322D
1114063 PIN AS
M312, M313C, M313D, M315, M315C, M315D, M315D 2, M316C, M316D, M317D 2, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH
1102159 PIN AS
M312, M313C, M315, M315C, M316C, M316D, M318, M318C, M318C MH, M318D, M318D MH, M320, M322C, M322D, M322D MH
1140468 PIN
235C, 322B L, 322B LN, 322C, 323D L, 323D2 L, 324D, 325 L, 325B L, 325C, 325D, 326D L, 329D, 329D L, 330, 330B, 330B L, 330C, 330C L, 330D, 330D L, 336D, 336D2, 336E, 336E H, 340D L, 340D2 L, 345B II,...
1324766 PIN-G.E.T.
312D, 312D L, 312D2 L, 315C, 317B LN, 318B, 318C, 320 L, 320B, 320C, 321D LCR, 322B L, 322B LN, 322C, 325B L, 325C, 330, 330 FM L, 950F, 950G, 953C, 963, 963C, M312, M315, M318, M320
0998111 PIN-SPRING
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2491, 2590, 307, 307B, 322, 322 FM L, 322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D L, 324D LN, 324E, 324E L, 324E LN, 325, ...
2426803 PIN-DOWEL
318C, 319C, 320C, 320C FM, 320C L, 320D, 320D FM, 320D FM RR, 320D GC, 320D L, 320D LN, 320D LRR, 320D RR, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 321C, 321D LCR, 322C, 322...
1218702 PIN AS
325B L, 325C FM, 325D FM, 325D FM LL, 330B L, 330C, 330C FM, 330C L, 330D FM, 330D L, 330D LN, 336D L, 350, 350 L, 365B, 365B II, 365B L, 365C, 365C L, 385C, 568 FM LL, M325B, M325C MH, M325D L MH
1132963 PIN AS
322 LN, 322B L, 322B LN, 322C, 322C FM, 324D, 324D FM, 324D FM LL, 324D LN, 324E LN, 325 LN, 325B L, 325C, 325C FM, 325D, 325D FM, 325D FM LL, 325D L, 328D LCR, 329D LN, 330, 330 FM L, 330 L, 330B, 33...
4I4619 PIN AS
322B L, 322C, 322C FM, 324D FM, 324D FM LL, 325, 325 L, 325 LN, 325B, 325B L, 325C FM, 325D FM, 325D FM LL, M325B, M325C MH, M325D L MH
2056859 PIN AS
M322C, M322D, M322D MH
1337261 PIN-HANDLE
M318, M318C, M318C MH, M318D MH, M320, M322C, M322D MH
1430693 PIN
312B L, 315B L, 317B LN, 318B, 320B, 322B LN, 325B L, 330B L, 345B II, 345B L, 365B, 365B II, 385B, 5090B
1282173 PIN
305.5E, 307B, 307C, 307D, 307E, 308C, 308E, 308E CR, 311B, 311C, 311D LRR, 312B, 312B L, 312C, 312C L, 312D, 312D L, 315B L, 315C, 315D L, 317B LN, 318B, 318C, 319C, 319D, 319D L, 319D LN, 320B, 320B ...
1506527 PIN
315B L, 315C, 317B LN
1506528 PIN
315B L, 315C, 317B LN
2058643 PIN AS
315B L, 317B LN
2058642 PIN AS
315B L, 317B LN
0951321 PIN-CLEVIS
315B, 315B FM L, 315B L, 317B LN, 318B, 320B, 320B FM LL, 320B U, 320C, 320C FM, 320C L, E110, E120, E140, E240
1311048 PIN
M318, M318C, M318C MH, M320, M322C, M325C MH
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.