AVSPARE.COM
parts catalog

PIPE AS-DRAIN 1694959 - Caterpillar



1694959 PIPE AS-DRAIN Caterpillar parts PIPE
Rating:
66
Alternative (cross code) number:
CA1694959
169-4959
1694959
Caterpillar 1694959 PIPE AS-DRAIN
Weight: 1 pounds 0 kg.

Buy PIPE AS-DRAIN 1694959 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:


Table 1
New Part Number Description Quantity
0S-1615 Bolt 2
4F-7391 O-Ring Seal 1
7L-6580 O-Ring Seal 2
8T-9588 O-Ring Seal 1
9N-5085 Clamp 3
118-7214 O-Ring Seal 2
324-9290 Bellows As 1
344-2636 Clamp As 4
436-9149 Cooler As 1
442-7347 Elbow 1
444-3516 Tube 1
444-3517 Tube As 1
445-6881 Hose 1
450-2351 Band Clamp 2 This change is effective for the serial numbers listed in Table 2.
Table 2
Effective Serial Numbers
S/N:DNM00359-UP
S/N:DP400103-UP
S/N:HSM00307-UP
S/N:TYE00224-UP
S/N:MGF00265-UP
S/N:B3700103-UP
S/N:PT700002-UP
S/N:T4P00491-UP
S/N:E4R00002-UP
S/N:TFJ00180-UP
S/N:T4R03303-UP
S/N:T4S00384-UP
S/N:E4S00140-UP
S/N:TFN00174-UP
S/N:TFK00739-UP
S/N:TWX00812-UP
S/N:MB900127-UP Refer to Special Instruction, REHS7798, "Procedure for Removing and Installing the Exhaust Cooler (NRS) on All Tier 4 C15 and C18 Engines" for additional information.Note: A new 324-9290 Bellows As and two new 9N-5085 Clamp will be installed on the exhaust inlet side of the NRS cooler. A new 9N-5085 Clamp will be installed on the exhaust outlet side of the NRS cooler.Refer to Special Instruction, REHS7798, "Procedure for Removing and Installing the Exhaust Cooler (NRS) on All Tier 4 C15 and C18 Engines" for additional information.Note: A new 324-9290 Bellows As and two new 9N-5085 Clamp will be installed on the exhaust inlet side of the NRS cooler. A new 9N-5085 Clamp will be installed on the exhaust outlet side of the NRS cooler.When refilling the engine coolant, be sure to get all the air out of the system to protect the NRS Cooler. The preferred coolant refill method is to vacuum fill. If the vacuum fill method is not an option, run engine at idle without pressure cap installed not allowing the system to pressurize.Note: Make sure that the pressure cap is reinstalled after air has purged out. Do not run engine this way for an extended amount of time.
Illustration 1 g03847836
(1) 436-9149 Cooler As
(2) 344-2636 Clamp As
Illustration 2 g03895722
(3) 7L-6580 O-Ring Seal
(4) 444-3517 Tube As
(5) 450-2351 Band Clamp
(6) 118-7214 O-Ring Seal
(7) 444-3516 Tube
(8) 445-6881 Hose
(9) 4F-7391 O-Ring Seal
Illustration 3 g03895724
(6) 118-7214 O-Ring Seal
(10) 8T-9588 O-Ring Seal
(11) 442-7347 Elbow


Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.