3599365 PIPE AS Caterpillar parts 349E, 349E L, 349E L HVG, 349E L VG, 349F L PIPE
Rating:
Alternative (cross code) number:
CA3599365
359-9365
3599365
CA3599365
359-9365
3599365
Weight: 4 pounds 2 kg.
Buy PIPE AS 3599365 Caterpillar genuine, new aftermarket tractor parts with delivery
EXCAVATOR, MOBILE HYD POWER UNIT,
Compatible equipment models: 3599365:
Information:
Removal Procedure
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
Install the truck body retaining cables. Operation and Maintenance Manual, "Cable (Truck Body Retaining)".
Turn the power disconnect switch to the OFF position.
Personal injury or death can result from a fire.Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system.Turn the disconnect switch OFF or disconnect the battery when changing fuel filters.
Drain the fuel tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain".
Illustration 1 g01963402
Remove cover (1) .
Illustration 2 g01963404
Disconnect harness assembly (2). Remove the connector from harness assembly (2) in order to remove harness assembly (2) through the guard of the fuel tank.
Illustration 3 g01963405
Disconnect harness assembly (3). Disconnect clips (4), (5), and (7). Reposition harness assembly (2). Disconnect hose assemblies (6) .
Illustration 4 g01963406
Illustration 5 g01963407
Disconnect hose (9) from fuel tank (8) .
Attach a suitable lifting device to fuel tank (8). The weight of an empty fuel tank (8) is approximately 1770 kg (3900 lb). Remove caps (10) and shims (11) .
Illustration 6 g01968799
Attach a suitable lifting device to plate assembly (15). The weight of plate assembly (15) is approximately 32 kg (70 lb). Remove bolts (13), mount assemblies (14), and plate assembly (15) .Installation Procedure
Install fuel tank (8) in the reverse order.
Illustration 7 g01969118
Illustration 8 g01969119
Measure Dimension (X) on the fuel tank.
Install cap (10). Measure Dimension (Y) on the frame.
Subtract Dimension (X) from Dimension (Y) in order to obtain the thickness of shims. Use shims to obtain a gap of 0.00 - 0.12 mm (0.000 - 0.005 inch) between Dimension (X) and Dimension (Y) .
Fill the fuel tank. Refer to Operation and Maintenance Manual, "Fuel System - Fill - Fast Fill Fuel Adapter".
The space between the body and the frame becomes a zero clearance area when the body is lowered. Failure to install the retaining cable can result in injury or death to personnel working in this area.
Install the truck body retaining cables. Operation and Maintenance Manual, "Cable (Truck Body Retaining)".
Turn the power disconnect switch to the OFF position.
Personal injury or death can result from a fire.Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire.Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system.Turn the disconnect switch OFF or disconnect the battery when changing fuel filters.
Drain the fuel tank into a suitable container for storage or disposal. Refer to Operation and Maintenance Manual, "Fuel Tank Water and Sediment - Drain".
Illustration 1 g01963402
Remove cover (1) .
Illustration 2 g01963404
Disconnect harness assembly (2). Remove the connector from harness assembly (2) in order to remove harness assembly (2) through the guard of the fuel tank.
Illustration 3 g01963405
Disconnect harness assembly (3). Disconnect clips (4), (5), and (7). Reposition harness assembly (2). Disconnect hose assemblies (6) .
Illustration 4 g01963406
Illustration 5 g01963407
Disconnect hose (9) from fuel tank (8) .
Attach a suitable lifting device to fuel tank (8). The weight of an empty fuel tank (8) is approximately 1770 kg (3900 lb). Remove caps (10) and shims (11) .
Illustration 6 g01968799
Attach a suitable lifting device to plate assembly (15). The weight of plate assembly (15) is approximately 32 kg (70 lb). Remove bolts (13), mount assemblies (14), and plate assembly (15) .Installation Procedure
Install fuel tank (8) in the reverse order.
Illustration 7 g01969118
Illustration 8 g01969119
Measure Dimension (X) on the fuel tank.
Install cap (10). Measure Dimension (Y) on the frame.
Subtract Dimension (X) from Dimension (Y) in order to obtain the thickness of shims. Use shims to obtain a gap of 0.00 - 0.12 mm (0.000 - 0.005 inch) between Dimension (X) and Dimension (Y) .
Fill the fuel tank. Refer to Operation and Maintenance Manual, "Fuel System - Fill - Fast Fill Fuel Adapter".
Caterpillar parts catalog:
Parts pipe Caterpillar catalog:
2363257
PIPE
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2470C, 2491, 2570C, 2590, 2670C, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304.5, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E,...
1090, 1190, 1190T, 1290T, 1390, 2290, 2390, 2391, 2470C, 2491, 2570C, 2590, 2670C, 303, 303.5, 303.5C, 303.5D, 303.5E, 303C CR, 303E CR, 304, 304.5, 304C CR, 304D CR, 304E, 305, 305.5, 305.5D, 305.5E,...
1141399
PIPE-GAUGE
1090, 1190, 1190T, 1290T, 315D L, 316E L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E ...
1090, 1190, 1190T, 1290T, 315D L, 316E L, 318C, 318D L, 319C, 319D, 319D L, 319D LN, 320B, 320C, 320C FM, 320C L, 320D, 320D FM, 320D GC, 320D L, 320D LN, 320D2, 320D2 GC, 320D2 L, 320E, 320E L, 320E ...
3568163
PIPE AS
349E, 349E L, 349E L VG, 349F L
349E, 349E L, 349E L VG, 349F L
3568165
PIPE AS
349E, 349E L, 349E L VG, 349F L
349E, 349E L, 349E L VG, 349F L
3390687
PIPE AS
349E
349E
3390689
PIPE AS
349E
349E
3390691
PIPE AS
349E
349E
4458159
PIPE AS
336D2, 336F L, 349D L, 349F L
336D2, 336F L, 349D L, 349F L
4180720
PIPE AS
349F L
349F L
3968564
PIPE AS
349F L
349F L
3946862
PIPE AS
349F L
349F L
4514074
PIPE AS
349F L
349F L
3506904
PIPE AS
349E, 349E L, 349E L HVG, 349E L VG, 349F L
349E, 349E L, 349E L HVG, 349E L VG, 349F L
6N0512
PIPE-AIR OUTLET
12G, 14G
12G, 14G
3689550
PIPE AS
345D, 345D L, 345D L VG, 349D, 349D L
345D, 345D L, 345D L VG, 349D, 349D L
3292727
PIPE AS
329E, 336E, 336E LN
329E, 336E, 336E LN
4331178
PIPE AS
385C, 385C FS, 385C L, 385C L MH, 390D, 390D L
385C, 385C FS, 385C L, 385C L MH, 390D, 390D L
3372683
PIPE AS
349E, 349E L, 349E L HVG, 349E L VG, 349F L
349E, 349E L, 349E L HVG, 349E L VG, 349F L
3372678
PIPE AS
349E, 349E L, 349E L HVG, 349E L VG, 349F L
349E, 349E L, 349E L HVG, 349E L VG, 349F L
3372679
PIPE AS
349E, 349E L, 349E L HVG, 349E L VG, 349F L
349E, 349E L, 349E L HVG, 349E L VG, 349F L
3372663
PIPE AS
349E, 349E L, 349E L VG, 349F L
349E, 349E L, 349E L VG, 349F L
3514225
PIPE AS-EXHAUST
349E, 349E L, 349E L HVG, 349E L VG
349E, 349E L, 349E L HVG, 349E L VG
3396909
PIPE AS
349E, 349E L, 349E L HVG, 349E L VG, 349F L
349E, 349E L, 349E L HVG, 349E L VG, 349F L