parts catalog

PISTON 2H9136 - Caterpillar

2H9136 PISTON Caterpillar parts D337 PISTON
Alternative (cross code) number:
Caterpillar 2H9136 PISTON

Buy PISTON 2H9136 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 2H9136:

MARINE ENGINE  D337   Caterpillar
Number on catalog scheme: None
  For full view, you need register


Start By:a. remove steering clutches 1. Remove brake band (2) and outer drum (1) from the steering clutch. 2. Install tooling (B) to the end of the clutch shaft and install it in a vise.3. Remove lock (3). Use tooling (A) and loosen nut (4) until it is even with the top of the shaft.
Do not remove nut (4). This will keep the drum on the shaft when it is loosened from the taper on the shaft.
4. Remove the steering clutch from the vise. The weight is approximately 45 kg (100 lb.).5. Use tooling (D) as shown to push the shaft from the inner drum. Remove tooling (D) and nut (4). Remove the shaft from the steering clutch. 6. Install tooling (H) on the other side of the steering clutch and install it in a vise.7. Remove two setscrews (5). Use tool (E) and remove spanner nut (6) from the plate assembly. 8. Bend locks (7) down and remove bolts (8) that hold the yoke in place.9. Remove yoke (9) from the plate assembly. 10. Use a pry bar on each side of the bearing cage and remove

Caterpillar parts catalog:

Caterpillar parts catalog
D337 MARINE ENGINE 23B00300-00455

Parts piston Caterpillar catalog:

2F3666 PISTON (STD.)
D326F, D337, D342
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.