AVSPARE.COM
parts catalog

PIVOT SHAFT, 1 in. SH721205 - Caterpillar



SH721205 PIVOT SHAFT, 1 in. Caterpillar parts D7G PIVOT
Rating:
43
Alternative (cross code) number:
CASH721205
SH72-1205
SH721205
Caterpillar SH721205 PIVOT SHAFT, 1 in.

Buy PIVOT SHAFT, 1 in. SH721205 Caterpillar genuine, new aftermarket tractor parts with delivery
TRACK-TYPE TRACTOR,

Compatible equipment models: SH721205:

TRACK-TYPE TRACTOR  D7G   Caterpillar
Number on catalog scheme: 9
 
  For full view, you need register

Information:


No clearance for person in this area when machine turns. Severe injury or death from crushing could occur.
Note: To connect the steering frame lock, the machine must be in the straight ahead position.
Illustration 1 g03280736
Steering frame lock in the STORED position.
(1) Locking pin (not visible)
(2) Retaining pin
(3) Steering frame lock
Remove locking pin (1) from retaining pin (2). Remove the retaining pin which secures steering frame lock (3) in the STORED position.
Illustration 2 g03280838
Steering frame lock in the LOCKED position.
Rotate the free end of the steering frame lock so that the holes in the steering frame lock align with the hole in the front frame of the machine.
Install retaining pin (2) through the holes of the steering frame lock and through the hole in the front frame of the machine. Secure the retaining pin with locking pin (1) that was removed in step 1. Note: Connect the steering frame lock when the machine is being lifted and when the machine is being transported. Also connect the steering frame lock if you are performing service work near the articulation joint.Disconnect the steering frame lock from the front frame and place the steering frame lock in the STORED position before the machine is operated.

Caterpillar parts catalog:

Caterpillar parts catalog
D7G TRACTOR 3GF00001-UP (MACHINE)


Parts pivot Caterpillar catalog:

4J7961 PIVOT
814B, 824C, 824S, 825C
5T3144 PIVOT AS-IDLER
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 143H, 14G, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16G, 16H, 16H NA
5T3145 PIVOT AS-IDLER
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 143H, 14G, 14H, 14H NA, 160H, 160H ES, 160H NA, 160K, 163H, 163H NA, 16G, 16H, 16H NA
5T3613 PIVOT-LH
120G, 12G, 130G, 140G
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.