AVSPARE.COM
parts catalog

PLATE 1246365 - Caterpillar



1246365 PLATE Caterpillar parts 24H PLATE
Rating:
70
Alternative (cross code) number:
CA1246365
124-6365
1246365
Caterpillar 1246365 PLATE
Weight: 1 pounds 0 kg.

Buy PLATE 1246365 Caterpillar genuine, new aftermarket tractor parts with delivery
MOTOR GRADER,

Compatible equipment models: 1246365:

MOTOR GRADER  24H   Caterpillar
Number on catalog scheme: 5
 
  For full view, you need register

Information:


Illustration 1 g06066684
Table 2
Troubleshooting Test Step Value Result
1. Check for Codes
A. Connect Cat® Electronic Technician (ET) to the service tool connector.
B. Look for active codes that are associated with the system for the event code.
Codes
Result: An associated code is active.
Repair: Troubleshoot the associated code before continuing with this test.
Result: A code is active or logged.
Proceed to Test Step 2.
Result: A code is not active or logged.
Proceed to Test Step 7.
2. Check the Resistance of the Diesel Exhaust Fluid Control Unit (DCU) Resistor
A. Turn the keyswitch to OFF.
B. Disconnect the 86-pin connector from the DCU that is logging the code.
C. Measure the resistance between pin-38 and pin-39 on the DCU that is logging the code.
- For Aftertreatment #1 DCU #1 the resistance should be 178Ω 10Ω
- For Aftertreatment #2 DCU #2 the resistance should be 604Ω 10Ω
- For Aftertreatment #2 DCU #1 the resistance should be 1540Ω 10Ω
- For Aftertreatment #2 DCU #2 the resistance should be 5230Ω 10Ω
Note: The 398-5063 Probe must be used to prevent damage to the DCU connector.
Resistance
Result: The resistance measurement of the DCU resistor at the affected DCU connector was within specification.
Proceed to Test Step 7.
Result: The resistance measurement of the DCU resistor at the affected DCU connector was not within specification.
Proceed to Test Step 3.
3. Check the Resistance of the DCU Resistor
A. Turn the keyswitch to OFF.
B. Disconnect the 8-pin connector from the affected DCU.
C. Measure the resistance between the following on the DCU resistor pins:
- For Aftertreatment #1 DCU #1, pin-1 and pin-5, the resistance should measure 178Ω 10Ω
- For Aftertreatment #1 DCU #2, pin-2 and pin-6, the resistance should measure 604Ω 10Ω
- For Aftertreatment #2 DCU #1, pin-3 and pin-7, the resistance should measure 1540Ω 10Ω
- For Aftertreatment #2 DCU #2, pin-4 and pin-8, the resistance should measure 5230Ω 10Ω
Resistance
Result: The resistance measurement of the DCU resistor was within specification.
Proceed to Test Step 4.
Result: The resistance measurement of the DCU resistor was not within specification.
Repair: A failed DCU resistor has been detected. Replace the DCU resistor.
Proceed to Test Step 7.
4. Check the Wiring between the DCU Resistor and the Affected DCU for an Open Circuit
A. Turn the keyswitch to OFF.
B. Disconnect the 86-pin connector from the affected DCU.
C. Disconnect the 8-pin connector from the DCU resistor.
D. Measure the resistance between the following pins on the affected DCU:
- For Aftertreatment #1 DCU #1, pin-38 on the 86-pin DCU connector and pin-1 on the DCU resistor 8-pin connector
- For Aftertreatment #1 DCU #1, pin-39 on the 86-pin DCU connector and pin-5 on the DCU resistor 8-pin connector
- For Aftertreatment #1 DCU #2, pin-38 on the 86-pin DCU connector and pin-2 on the DCU resistor 8-pin connector
- For Aftertreatment #1 DCU #2, pin-39 on the 86-pin DCU connector and pin-6 on the DCU resistor 8-pin connector
- For Aftertreatment #2 DCU #1, pin-38 on the 86-pin DCU connector and pin-3 on the DCU resistor 8-pin connector
- For Aftertreatment #2 DCU #1, pin-39 on the 86-pin DCU connector

Caterpillar parts catalog:

Caterpillar parts catalog
24H Motor Grader 7KK00001-UP (MACHINE) POWERED BY 3412E Engine


Parts plate Caterpillar catalog:

9R8760 PLATE
24H, 24M, 416B, 416C, 416D, 420D, 424B, 424B HD, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 980G, 980G II, 980H, 980K, 980K HLG, C15, C15 I6, C18 I6, C9
5P8197 PLATE-WARNING
120G, 120H, 120H ES, 120H NA, 12G, 12H, 12H ES, 12H NA, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 143H, 14G, 14H, 14H NA, 160G, 160H, 160H ES, 160H NA, 163H NA, 16G, 16H, 16H NA, 215, 215B, 2...
8P9770 PLATE
14G, 215, 215B, 215C, 215D, 225, 225D, 229, 229D, 231D, 235, 235B, 235C, 235D, 245, 245B, 24H, 24M, 307C, 311C, 311D LRR, 311F LRR, 312, 312B L, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 3...
7E9262 PLATE-THRUST
245B, 24H, 3406B, 3406E, 3408, 3412, 3412C, 3412E, 375, 375 L, 5080, 5110B, 583R, 589, 621E, 631G, 637G, 651E, 657E, 769C, 769D, 771C, 771D, 773B, 773E, 775B, 824C, 826C, 980C, 980F, 980G, 980H, 988F,...
4J3816 PLATE
215, 215B, 225, 229, 235, 235B, 235D, 245, 245B, 24H, 24M, 5110B, 5130, 5130B, 5230, 5230B, 528, 589, 621, 621B, 621E, 621F, 621G, 621R, 623E, 623F, 623G, 627B, 627E, 627F, 627G, 631C, 631E, 631G, 633...
9T9460 PLATE-VALVE
120M, 12M, 140M, 160M, 24H, 824G, 824G II, 824H, 825G, 825G II, 825H, 826G, 826G II, 826H, 980G, 980G II, 980H, D6H, D6R
9T7767 PLATE-RETRACTION
120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 143H, 160G, 160H, 160H ES, 160H NA, 160K, 160M, 1...
4V9804 PLATE
120G, 120H, 120H ES, 120H NA, 120K, 120K 2, 120M, 120M 2, 12G, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 130G, 135H, 135H NA, 140G, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 14...
9T8450 PLATE-RETAINING
14G, 14H, 14H NA, 14M, 16G, 16H, 16H NA, 16M, 24H, 24M, 5230, 5230B, 789B, 789C, 789D, 793, 793B, 793C, D8N, D8R, D8R II, D9R
1644891 PLATE AS
24H, 24M, 824G II, 824H, 825G II, 825H, 826G II, 826H, 834B, 834G, 834H, 836, 836G, 836H, 980G, 980G II, 980H, 980K, 980K HLG, 986H, 988B, 988F, 988F II, 988G, 988H, AD30, D350E, D350E II, D400E, R290...
1T1315 PLATE-CLUTCH
24H, 24M, 69D, 735, 740, 769C, 769D, 770, 771C, 771D, 772, 773B, 773D, 773E, 773F, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G LRC, 775G OEM, 834G, 834H, 836G, 836H, 844, 844H, 988F II, 988G, 988...
1T1617 PLATE-RETAINER
24H, 24M, 69D, 735, 735B, 740, 740B, 769C, 769D, 770, 770G, 770G OEM, 771C, 771D, 772, 772B, 772G, 772G OEM, 773B, 773D, 773E, 773F, 773G LRC, 773G OEM, 775B, 775D, 775E, 775F, 775G LRC, 775G OEM, 834...
3071961 PLATE
120H, 120H ES, 120K, 120K 2, 120M, 120M 2, 12H, 12H ES, 12H NA, 12K, 12M, 12M 2, 12M 3, 12M 3 AWD, 135H, 140H, 140H ES, 140H NA, 140K, 140K 2, 140M, 140M 2, 140M 3, 140M 3 AWD, 14M, 160H, 160H ES, 160...
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.