PLATE 1247366 - Caterpillar

Product smu/age whichever comes first Caterpillar Dealer Suggested Customer Suggested
Parts % Labor Hrs% Parts % Labor Hrs% Parts % Labor Hrs%
*******Group 2*******
0-4000 hrs,
0-24 mo 100.0% 100.0% 0.0% 0.0% 0.0% 0.0%
4001-6000 hrs,
25-36 mo 33.0% 50.0% 0.0% 0.0% 50.0% 50.0%
This is a 2.0-hour job for Group 2
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Rework Procedure
Disassemble step 1: Remove two nuts of the slide handle with double offset ring spanner and then remove the slide handle.
Disassemble step 2: Remove four bolts of slide with internal hexagonal wrench.
Disassemble step 3: Remove two screws of the cushion by cross screwdriver.
Disassemble step 4: Remove six screws of the backrest by cross screwdriver.
Disassemble step 5: Remove the bolt by spanner, and remove the right cover.
Disassemble step 6: Remove the screws which used to fix plastic handle of recliner by cross screwdriver and then remove the plastic handle and left cover.
Image1.1.1
Image1.1.2
Image1.1.3
Image1.1.4
Image1.1.5
Image1.1.6
Assemble step 1: Assemble left cover on the recliner frame, then assemble the plastic handle, tighten by screws.
Assemble step 2: Assemble right cover on the torsional spring baseplate assembly at first; then tighten seatbelt bracket assembly by bush and seatbelt bolt. The torque value of seatbelt bolt is 70 +/- 15 N.M.
Assemble step 3: Assemble backrest on the frame and then fix it with six pan head screws.
Assemble step 4: Assemble cushion on the frame, fix it by two cross recess pan head screws.
Assemble step 5: Put the big gasket, left and right upper slide, and flat washer and screws on the slide mounting holes, fix the slide on the seat assembly; when it is qualified after tested by slide tooling, tighten the screws. The torque value of M8 bolt is 28 +/- 7 N.M.
Assemble step 6: Assemble the slide handle to the slideway, tighten it with M6 nuts.
Image1.2.1
Image1.2.2
Image1.2.3
Image1.2.4
Image1.2.5
Image1.2.6