AVSPARE.COM
parts catalog

PLATE 1C4175 - Caterpillar



1C4175 PLATE Caterpillar parts PLATE
Rating:
41
Alternative (cross code) number:
CA1C4175
1C-4175
1C4175
Caterpillar 1C4175 PLATE
Weight: 7 pounds 3 kg.

Buy PLATE 1C4175 Caterpillar genuine, new aftermarket tractor parts with delivery

  For full view, you need register

Information:

2. Remove bolts (5), the washers and the nuts from muffler (1) and support (3). Loosen band clamp (2) from muffler (1) and exhaust stack (4).3. Use a soft faced mallet to raise the muffler off of the exhaust stack. Use two people to tilt the muffler in order to clear the exhaust stack and the support, then remove the muffler from the machine. The weight of the muffler for both the 928G and the IT28G is 20 kg (44 lb). The following steps are for the installation of the muffler.4. Use two people to position the muffler on the exhaust stack and the support.5. Apply 5P-3931 anti seize compound to the threads and bearing surfaces of bolts (5), the washers and the nuts. Install bolts(5), the washers and the nuts to muffler (1) and support (3).6. Apply 5P-3931 anti seize compound to the threads and bearing surfaces on the bolt of band clamp (2). Tighten the band clamp to a torque of 47 7 N m (35 5 lb ft).7. Close the left engine compartment door.


Parts plate Caterpillar catalog:

Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.