parts catalog

PLATE-COVER 2278163 - Caterpillar

2278163 PLATE-COVER Caterpillar parts SW345B, SW60 PLATE
Alternative (cross code) number:
Caterpillar 2278163 PLATE-COVER
Weight: 6 pounds 2 kg.

Buy PLATE-COVER 2278163 Caterpillar genuine, new aftermarket tractor parts with delivery

Compatible equipment models: 2278163:

WHEEL SAW  SW345B   SW60   Caterpillar
Number on catalog scheme: 9
  For full view, you need register


Illustration 1Item 1- 5P-4829 Tube 610 mm (24 inch) long Qty -Item 2 - 5P-4961 Hose Clamp Qty 1Item 3 - 7T-9793 Valve Qty 1Item 4 - 6B-8692 Boss Qty 1Item 5 - 9M-7961 Fitting Qty 1 Installation Procedure
Illustration 2 Brake Linkage Enclosure (Top View) (A) Location for drilled hole (B) 20 mm (0.79 inch)1. Remove the enclosure cover.2. Drill a 1/2 inch hole at location (A).3. Use a3/8 inch bolt and washers to locate and hold the 6B-8692 Boss in place on the bottom of the enclosure at location (A). Make sure the boss doesn't protrude past the edge of the bottom of the enclosure.4. Weld the boss to the brake box. (Two 1/2 inch welds, 180 degrees apart should be sufficient.) Then remove the bolt and washers used to hold it in place.5. Install 9M-7961 Fitting into the boss.6. Install the 7T-9793 Valve in the 24 inch piece of the 5P-4829 Tube. Moisten the valve before installation. Then insert the valve at least 1 inch into the tube. Make sure that you install the valve so that the pointed end is facing out of the tube.7. Install the opposite end of the tube on the 9M-7961 Fitting and fasten the tube in place by using the 5P-4961 Clamp. Make sure that the valve in the opposite end of the tube has the pointed end facing down.8. Reinstall the cover. When installing, make sure to slide the cover up on the clearance holes for the mounting bolts as far as possible in order to get the best possible seal across the top.COPYRIGHT 2001 CATERPILLAR ALL RIGHTS RESERVED

Caterpillar parts catalog:

Caterpillar parts catalog
SW45 & SW60 Wheel Saws WLS00001-UP (MACHINE)
SW345B, SW360B & SW460B Wheel Saws HFS00001-UP (MACHINE)

Parts plate Caterpillar catalog:

3V0046 PLATE
10 FT, 10-20B, 30/30, 307C, 307D, 308D, 311C, 311D LRR, 312C L, 312D, 312D L, 314C, 314D CR, 314D LCR, 315C, 315D L, 316E L, 318C, 319D, 319D L, 319D LN, 320C, 320D, 320D L, 320D LRR, 320D RR, 320D2 L...
PC206, PC310B, SW345B, SW60
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.