AVSPARE.COM
parts catalog

PLATE & FILM GP 3156522 - Caterpillar



3156522 PLATE & FILM GP Caterpillar parts 424B PLATE
Rating:
58
Alternative (cross code) number:
CA3156522
315-6522
3156522
Caterpillar 3156522 PLATE & FILM GP

Buy PLATE & FILM GP 3156522 Caterpillar genuine, new aftermarket tractor parts with delivery
BACKHOE LOADER,

Compatible equipment models: 3156522:

BACKHOE LOADER  424B   Caterpillar
  For full view, you need register

Information:

Inputs
The machine has several different types of input devices. The ECM receives machine status information from the input devices and determines the correct output action that is needed in order to control machine operations based on memory and software parameters. The machine utilizes the following types of inputs: switch type and sensor type. Switches provide signals to the switch inputs of the ECM. The possible outputs of a switch are listed: an open signal, a grounded signal and + battery signal. Sensors provide an electrical signal to the ECM that constantly changes. The sensor input to the ECM can be one of several different types of electrical signals such as: pulse width modulated (PWM) signals, voltage signals and frequency input signals. Each possible input to the ECM is listed in the tables for the 70-pin connectors.Inputs provide information to the ECM in the form of sensors or switches.Sensors
Sensors provide information to the ECM about the intent of the operator or changing conditions. The sensor signal changes proportionally to the changing of operator input or changing conditions. The following types of sensor signals are used by the ECM.Frequency - The sensor produces a signal and the frequency (Hz) varies as the condition changes.Pulse width modulated - The sensor produces a signal. The duty cycle of the signal varies as the condition changes. The frequency of this signal is constant.Analog - The ECM measures the voltage that is associated to a specific condition of the control.Brake Charge Pressure Sensor
Illustration 3 g03324121The brake charge pressure sensor measures the pressure on the low side of the brake system. The sensor sends a pulse width modulated signal to the ECM. The duty cycle of the signal increases as pressure increases.Switches
Switches provide an open signal, a ground signal, or a +battery signal to the inputs of the ECM. Switches are open or closed.
When a switch is open, no signal is provided to the corresponding input of the ECM. This “no signal” condition is also called “floating”.
When a switch is closed, a ground signal or a +battery signal is provided to the corresponding input of the ECM.Brake Pedal Switch
Illustration 4 g03571301The brake pedal switch is located in the base of the brake pedal assembly. The switch activates to illuminate the brake lights, and to alert the ECM that the service brakes are being applied. The switch has a normally open and a normally closed contact. When the switch is not activated, the normally open contact floats to a high voltage state, and the normally closed contact is pulled to a low voltage state. When the switch is activated the voltage state of the two contacts reverses.Outputs
The ECM responds to decisions by sending electrical signals to the outputs. The outputs can create an action or the outputs can provide information to the operator or the service technician.Solenoids
Brake Charge Solenoid
Illustration 5 g03423744The brake charge solenoid is an on/off type solenoid that controls the flow of oil to the brake accumulators. The ECM sends a signal to energize or de-energize the

Caterpillar SIS machinery equipment:

Caterpillar SIS

Caterpillar parts catalog:

Caterpillar parts catalog
424B Backhoe Loader JRC05546-UP (MACHINE)


Parts plate Caterpillar catalog:

9R8874 PLATE
416B, 416C, 416D, 420D, 424B, 424B HD, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436B, 436C, 438B, 438C, 438D, 442D
1010117 PLATE
414E, 416, 416B, 416C, 416D, 416E, 416F, 420D, 420F, 422E, 422F, 424B, 424B HD, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 430F, 436C, 438C
9R8760 PLATE
24H, 24M, 416B, 416C, 416D, 420D, 424B, 424B HD, 424D, 426B, 426C, 428B, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, 980G, 980G II, 980H, 980K, 980K HLG, C15, C15 I6, C18 I6, C9
1179713 PLATE-CONVERTER REINFORCEMENT
414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424B, 424B HD, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F,...
1117906 PLATE-CONVERTER DRIVE
414E, 416C, 416D, 416E, 416F, 420D, 420E, 420F, 422E, 422F, 424B, 424B HD, 424D, 426C, 428C, 428D, 428E, 428F, 430D, 430E, 430F, 432D, 432E, 432F, 434E, 434F, 436C, 438C, 438D, 442D, 442E, 444E, 444F,...
1221882 PLATE-END
416C, 416D, 420D, 424B, 424B HD, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
1221881 PLATE-CLUTCH
416C, 416D, 420D, 424B, 424B HD, 424D, 426C, 428C, 428D, 430D, 432D, 436C, 438C, 438D, 442D, TH220B, TH330B, TH340B, TH350B, TH355B, TH460B, TH560B, TH580B
1683385 PLATE-RETRACTION
246D, 24M, 262D, 272D, 277D, 279D, 287D, 289D, 299D, 305.5E, 345D, 345D L, 345D L VG, 349D, 349D L, 35, 365B, 365B II, 365B L, 365C, 365C L, 365C L MH, 374D L, 385B, 385C, 385C FS, 385C L, 385C L MH, ...
2792491 PLATE-PORT
24M, 305.5E, 414E, 416E, 416F, 422E, 422F, 424B, 424B HD, 428E, 428F, 434E, 434F, 568 FM LL, 621H, 621K, 623H, 623K LRC, 627H, 627K LRC, 914K, 988K, C13, C15, C18, CX31-C15I, CX31-C18I, CX35-C18I, CX3...
2837522 PLATE
416D, 420D, 424B, 424B HD
2837523 PLATE AS
416D, 420D, 424B, 424B HD
2043093 PLATE
424B, 424B HD, CP-433E, CP-44, CS-423E, CS-433E, CS-44, TH210, TH215
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.